Valcom VM-SRLY Quick Start Manual

INTRODUCTION
The VM-SRLY Smart Relay module is designed
for use with Valcom SIP Intercoms. The Smart
Relay provides both a Normally Open and
Normally Closed (Form C) output connection for
use with auxiliary equipment such as electric door
strikes, gate openers, etc.
SPECIFICATIONS
Access Methods

Valcom SIP Intercoms
Features

Smart signaling reduces possibility of
tampering

1 Form C relay
Dimensions/Weight:

2.5" H x 1.25" W x 1.25" D
(6.4 cm H x 3.2 cm W x 3.2 cm D)

Weight: 1 oz. (28 g)
Nominal Specifications
Relay Current:
Environment
Temperature:
Humidity: 0 to 85% non-precipitating
Compatibility
The VM-SRLY is compatible with the following
Valcom SIP Products:

VIP-176

VIP-180
VM-SRLY Smart Relay
1 AMP @ 24VDC
0 to +40° C
Precautionary Designations
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates uses and can radiate
radio frequency energy and if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area may cause
harmful interference in which case the user
will be required to correct the interference at
his own expense.
1
DO NOT OPEN
947487
ISSUE 1