Page 2
ZHZPG1302,” shall be placed on the outside of final host system. Antenna info Model Manufacturer Antenna Gain Antenna Type Connector Type BLG-AN-040 Datasheet Dragino Technology Co., 2.69dBi Fibre-glass epoxy antenna Limited. Dragino Technology Co., External antenna Limited. PG1302 LoRaWAN Concentrator 2 / 20...
Page 3
LG01 LoRa Gateway User Manual Document Version: 1.0.1 Image Version: v1.0 Version Description Date Release 2020-Dec-9 1.0.1 Add FAQ for how to get lorapktfwd.deb 2021-May-17 PG1302 LoRaWAN Concentrator 3 / 20...
Page 4
2.3.3 Config Gateway ID, Frequency Band and Server address ....10 2.3.4 Commands to handle service ............11 Order Info ......................11 Packing Info ...................... 11 FAQ ........................12 How to compile the pkt-fwd for RPi? ............12 Reference ......................12 Support ......................12 PG1302 LoRaWAN Concentrator 4 / 20...
Page 5
The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
System structure This example is an example to show how to set up the PG1301 + RPi as a LoRaWAN gateway to use with TheThingsNetwork(TTN) LoRaWAN server.. Set up method for other server are similar PG1302 LoRaWAN Concentrator 7 / 20...
In RPI, run below command to generate a Gateway ID ifconfig eth0 | grep eth0 | awk '{gsub(/:/,"");print $5"ffff"}' Here we got b827xxxxx65fffff. Input this to TTN. Make sure to select legacy packet forwarder PG1302 LoRaWAN Concentrator 8 / 20...
Page 9
This will download the packet forwarder package from Dragino Server to RPI. run “sudo dpkg -i lorapktfwd.dep” to install pkt fwd, pktfwd will auto run after this command. But the TTN will still show not connected because the Gateway ID doesn’t match.
Page 10
The pktfwd will start with the new gateway ID and TTN should show the connection ok: If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN –> Gateway - -> Traffic PG1302 LoRaWAN Concentrator 10 / 20...
Page 11
Packing Info Package Includes: ✓ PG1301 x 1 ✓ LoRa Antenna x 1 Dimension and weight: ✓ Device Size: cm ✓ Device Weight: ✓ Package Size / pcs : cm ✓ Weight / pcs : PG1302 LoRaWAN Concentrator 11 / 20...
Page 12
➢ Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to https://www.dragino.com/ PG1302 LoRaWAN Concentrator 12 / 20...
Page 13
ANT 1 ANT 1: Fibre-glass epoxy antenna 915MHz PG1302 LoRaWAN Concentrator 13 / 20...
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. PG1302 LoRaWAN Concentrator 20 / 20...
Need help?
Do you have a question about the PG1302 and is the answer not in the manual?
Questions and answers