Software For Controlling Support Unit - AOpen CD-952E/TKU Manual

4.8.2 Software for Controlling Support Unit

A test program which generates a complete line of continuously repeating "H" pattern is
used as the software test program. The program was executed as follows:
A. Read and write to the disk drives.
B. Send H pattern to the video port device (Monitor).
C. Send H pattern to the serial port device (Modem 1).
D. Send H pattern to the serial port device (Modem 2).
E. Send H pattern to the parallel port device (Printer).
F. Send audio signal to the speaker.
G. Receive audio signal from walkman.
H. Receive audio signal from the microphone.
I. Capture Video image from digital camera than playback to display.
J. Send audio signal to the headphone.
K. Repeat the above steps.
Printer1
Modem 1
Modem 2
Monitor
International Standards Laboratory
(NVLAP Lab. Code: 200234-0)
-21-
Filename
Printer1.exe
Modem1.exe
Modem2.exe
Htest3.exe
Declaration of Conformity
Issued Date
8/20/1991
8/20/1991
8/20/1991
8/20/1991
Report Number: ISL-99135FB