Advertisement
SPECIFICATION
CODE-ME24
Control Mode
Two-door two-way or Four-door one-way
Processor
16 bit high speed CPU
Reader Interface
Wiegand 26/34 Bit
Number of Readers
4
Lock Output Relays
4
Card Capacity
20000
Record Capacity
50,000 event records + 20,000 alarm records
TCP/IP
Auxullary Monitored Inputs
4 inputs
Auxillary Relay Outputs
4 ouputs
Working Voltage
10-15V DC
Working Current
<100mA
Output Drive
12V/3A
Working Environment
Temperature: -10ºC-+55ºC Humidity: 10%-90%
WIRE REQUIREMENT
Wire Standard
PC > Switch/
Network Controller
8-core UTP
Switch > Controller
8-core UTP
Reader > Controller
8-core UTP
Lock > Controller
2-core cable
Exit Button > Controller
2- core cable
Emergency Break Glass
2-core cable
Unit >
Wire Distance
100m
100m
60m
60m
60m
60m
CODE-ME24
Access Controller Series
USER MANUAL
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Code ME24
- Page 1 SPECIFICATION WIRE REQUIREMENT CODE-ME24 Wire Standard Wire Distance Control Mode Two-door two-way or Four-door one-way Processor 16 bit high speed CPU PC > Switch/ Network Controller 8-core UTP 100m Reader Interface Wiegand 26/34 Bit Number of Readers Switch > Controller...
- Page 2 Important Notices Four Door One Way Notice: M controller series work with Code security management software only. Failure to follow the instructions below may lead to the malfunction of the system. 2.1 Connect the system according to the instructions described in this manual.
- Page 3 Keypad Proximity Reader CODE-2631 Box Proximity Reader CODE-2641 Vandal Resistant Mini Proximity Reader CODE-FC02 Card Distributor All output relays are of default setup and are programmable All output relays are of default setup and are programmable CODE-ME24 CODE-ME24 Two-door Two-way Four-door One-way...
- Page 4 Connect with router or computer directly Controller can connect with switch Code Software and controller can not or computer by network wire via communicate when their passwords are direct connection or cross over different. In case password is unknown, cable.
Need help?
Do you have a question about the ME24 and is the answer not in the manual?
Questions and answers