BorMann Elite BTW5012 Manual page 2

EN
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the prod-
ucts. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included in
the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or
for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by tech-
nicians of the authorized service department of the manufacturer.
2
Mounting Instructions
a. Put the two pieces of flexible hose (7) onto the thread pipe (4), then fix the
two pieces of flexible hose (07) for water inlet onto the mixer body (1).
b. Screw the thread pipe (4) onto the mixer body (1) and then put the o-ring (3)
onto the bottom ring of the base (2).
c. Put the mixer body (1) with base (2) onto the table.
d. Put the rubber washer (5) onto the thread pipe (4), then screw the cap nut
(6) onto the thread pipe (4) to fix the mixer body (1).
WWW.BORMANNTOOLS.COM
Assembling parts:
i. 1 x fixing part (1-6)
ii. 2 x fixing part (7)