Wyrestorm’s innate understanding and Safety Precautions www.wyrestorm.com Part Number AMP-001-010 Features sprays, drips or splashes and ensure that no Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Analog Subwoofer Pre-out for external connection of active sub woofer accepting single Mono/LFE RCA Input. RS232 serial control port – for direct and local control of AMP through third party control systems or PC. Software provided for connection to a control system - see www.wyrestorm.com for protocols for leading Control Systems.
Page 5
IR TX control transmitter port - For transmitting infrared control signals from central location to control TV function. Power ON/OFF switch – lit when powered (standby via remote control handset) HDBaseT output – repeats HDBaseT transmission a further 70m/230ft to another AMP-001-010 or RX-1UTP- IR-70 receiver to end the distribution, including embedded IR/RS232 commands. Attention: HDMI output –...
Page 6
IR Control IR Receiver AMP-001-010 AMP-001-010 1. AV Source> 1. AV Source> 70m/230ft Single Cat5e/6 2. ARC> 2. ARC> 3. Local Input> 3. Local Input> RS232 Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Page 7
IR Receiver IR Receiver AMP-001-010 AMP-001-010 1. AV Source> 1. AV Source> 70m/230ft Single Cat5e/6 2. ARC> 2. ARC> 3. Local Input> 3. Local Input> RS232 Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Page 8
AMP-001-010 as a Receiving Display Device Full 1080p HD Audio Video from centralized source HDMI via Cat5e/6 AMP-001-010 70m Single Cat5e/6 Speaker Cable to In-Ceiling Speakers Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
PoH transmission device to a PoH receiver to negate the need for mains power at the display end. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Handset Operation Attention: channel Attention: output rather than the spring terminal connectors of the AMP-001-010. 7vi. Interface Device Attention: connected to the relevant HDMI port Basic Operation Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Page 11
’ installation. Com Port Connection Status and Bass can all be set manually Click Search Address The ‘Address’ you typed in should populate under ‘All Addr’ Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Page 20
What Does This Mean? Note: control control system system 12vii. Active Sub Speaker Set Mute Function COMMAND Input Format ->command[space]add[space]variable key: Amp address matrix speaker subwoofer Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
AMP-001-010 you as well as areas to write the Address of the AMP unit and the Control Zone it will be located in. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
No Picture or poor quality picture Note: Note: inputs and outputs share the same resolution and that Test Monitor Part Number TTMONITOR Note: Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
FAQ’s Cat5e or 6? signal? Note: How far can the signal travel? What about 3D? Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
How do I control the sources? What about screens with different resolution capabilities? Do I need to use 1 or 2 cables? Are Wyrestorm products compatible with HDMI 1.4? Maintenance Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
“limited warranty coverage.” The warrantor is not liable for incidental or consequential damage resulting from the use of this product or arising out Warranty of any breach of this warranty. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Need help?
Do you have a question about the AMP-001-010 and is the answer not in the manual?
Questions and answers