1. Manuals
  2. Brands
  3. LaserBit Manuals
  4. Conference System
  5. GigaProduct Series
  6. User manual

LaserBit GigaProduct Series User Manual

Laser based free space optical communication system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GigaPICO&GigaPINTO
&GigaPRONTO
Users' Manual 4.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GigaProduct Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LaserBit GigaProduct Series

Summary of Contents for LaserBit GigaProduct Series

  • Page 1 GigaPICO&GigaPINTO &GigaPRONTO Users’ Manual 4.3...
  • Page 2 See attached data sheet for exact figures. The Laserbit product should be installed in such a way that nobody can access the optical window or can get in the way of the laser beam accidentally. For detailed instructions please read chapter 5.3.5 Eye Safety on page 20.
  • Page 3 Sicherheitsabstand variiert mit der Laserleistung und Divergenz des Laserstrahl. Details hierzu sind im Datenblatt nachzulesen. Das Laserbit Produkt muß so installiert werden, daß niemand Zutritt zu der Optik des Laserkopf hat oder zufällig in den Bereich des Laserstrahl kommen kann.
  • Page 4 Consulter la feuille de données ci-jointe pour calculs exacts. L’installation de produit Laserbit doit être faite de sorte que personne ne puisse accéder à la fenêtre optique ou traverser le rayon laser par accident. Pour instructions détaillées, lire la partie Sécurité...
  • Page 5 Per informazioni piu detagliati vedi la parte Sicurezza Ochhi del capitolo 5.3.5 nel manuale sulla pagina I prodotti Laserbit veranno forniti con tutte segnalazioni previste nelle norme. In addizione segnalazioni informative devono essere posizionate nel posti ben’ visibili dove il raggio di lazer puó...

  • Page 6: Table Of Contents

    Power supply configuration ________________________________________ 16 Content of the package ________________________________________________ 17 Contents of a Laserbit GigaPICO link _______________________________ 17 Contents of a Laserbit GigaPINTO link package ______________________ 18 Contents of a Laserbit GigaPRONTO link ___________________________ 19 Sites of installation____________________________________________________ 19...
  • Page 7 LaserBit Giga Series 4.3 page 7 10.2.3 Alignment of the heads _________________________________________ 31 10.2.4 Connecting to your Network_____________________________________ 33 10.2.5 Connecting to the management___________________________________ 34 10.3 GigaPINTO systems ______________________________________________ 35 10.3.1 How can you install the ODIU? __________________________________ 35 10.3.2 Fixing the heads ______________________________________________ 37 10.3.3...

  • Page 8: Introduction

    LaserBit Giga Series 4.3 page 8 2 Introduction 2.1 What is FSO? is free space optics provides point-point broadband communications using Laser Light as the transmission medium. is a state of art data communication method which is based on a very old communication solution.
  • Page 9 LaserBit Giga Series 4.3 page 9 Laserbit Communications To meet the demands for every higher bandwidth, continues to invest heavily in research and development with the newest product line which offers Gigabit speeds being launched. Laserbit This manual describes the series of free space laser transmission system.

  • Page 10: Optical Free-Space Transmission

    LaserBit Giga Series 4.3 page 10 2.2 Optical Free-space Transmission The principle used in free space laser transmission is very similar to the one is used for fibre optic transmission. The difference is while fibre optic devices use electronics and optics optimized for transmission to the air. Also one can observe to the similarity in the transmission properties.

  • Page 11: Typical Applications

    Where cable is actually not an alternative, like across rivers or railways or in rugged terrain. Urban areas Where only leased lines are available with limited speed, and high rental cost. With Laserbit links you can establish on line LAN-to-LAN connections. Industrial areas Where you have noisy environment with high EMI or RFI.

  • Page 12: About Laserbit

    Greece, Portugal, Switzerland, Spain, the Benelux-States, Turkish, Poland, Austria, Brazil, Russia, and Singapore. In the other hand the expansion of markets and partners in the Laserbit is keep going today which are helped with trainings, meetings and other programs and a fine support community.

  • Page 13: Laserbit Gigapinto Series

    LaserBit Giga Series 4.3 page 13 installation fast and easy. They can be ordered with IP based SNMP compatible device management that allows remote control and monitoring of the equipment. Laserbit Because they use infrared light as transmission medium, systems do not require frequency licenses and the transmission is not affected by electro-magnetic interference.

  • Page 14: Laserbit Gigapronto Series

    LaserBit Giga Series 4.3 page 14 management option. The laser transmission carries the data using the concentrated laser beam and a unique modulation technique is employed to ensure error free data transfer over distances up to 500 meter. The transparent and wire speed data transfer together with virtually zero latency assures the easy integration of the system in all environments.
  • Page 15 LaserBit Giga Series 4.3 page 15 GigaPRONTO the best value mid-range FSO product on the market. Because Laserbit they use infrared light as transmission medium, systems do not require frequency licenses and the transmission is not affected by electro-magnetic interference. The concentrated laser beam is extremely hard to tap, even to discover.

  • Page 16: Product Grouping By Interface Type

    LaserBit Giga Series 4.3 page 16 4 Product grouping by interface type 4.1 Gigabit Ethernet Interface systems Laserbit Giga products deliver ultra high bandwidth wireless connectivity that is unique to free space laser based systems. The applied technology is based on the...

  • Page 17: Content Of The Package

    Laserbit does not provide power cable for the connection of the main and the outdoor box. For the detailed information please see the chapters below: 6.1 Contents of a Laserbit GigaPICO link GigaPICO Laserbit For the systems...

  • Page 18: Contents Of A Laserbit Gigapinto Link Package

    LaserBit Giga Series 4.3 page 18 6.2 Contents of a Laserbit GigaPINTO link package GigaPINTO Laserbit or the systems provides all the necessary accessories to fix the head to the bracket, fix the Power supply unit and the bracket to the wall, below you can see what is provided in the GigaPinto package.

  • Page 19: Contents Of A Laserbit Gigapronto Link

    LaserBit Giga Series 4.3 page 19 6.3 Contents of a Laserbit GigaPRONTO link • 2ps of GigaPRONTO heads • 2ps of LB ODIU s (Outdoor Interconnection Unit) /the two grey plastic boxes/ • ODIU accessories: o 2ps of 276x110x1,5 metal plates...

  • Page 20: Preferred Installation Sites

    LaserBit Giga Series 4.3 page 20 Solid mount surface - is the key for long-term operation. Since the diameter of the beam is limited, it is extremely important to mount the unit on a stable structure with the possible smallest movement. This way the receiver of the remote unit cannot get out of the beam due to the movement of the opposite head.

  • Page 21: Distance Measurement

    7.3 Distance measurement Because the units were designed, and calibrated for certain distance operations the higher distance will decrease the availability. Laserbit pre-calibrates and pre-tests every unit shipped to the customer. To ensure that the unit you are about to buy fits to the needs, the first step is to measure the distance.
  • Page 22 EN 55022:1998+Corr:2001+A1:2000 and EN 55024:1998 Dismounting the cover can cause fatal injury! Manufactured by: LaserBit Communications Corp., 1037Budapest, Kunigunda u 45, HUNGARY, Tel.:+36-1-453-7440 Fax.:+36-1-240-3570 Manufactured by :LaserBit Communications Corp., 1037 Budapest, Kunigunda u 45, www.laserbit.net HUNGARY, Tel.: +36-1-453-7440, Fax: +36-1-240-3570 www.laserbit.net...

  • Page 23: The Mounting Bracket

    LaserBit Giga Series 4.3 page 23 9 The mounting bracket 9.1 Mounting brackets for GigaPICOs Laserbit provides the mounting bracket and all the necessary components for GigaPICO units. A simple fixing technique of this bracket can be seen on the...

  • Page 24: Mounting Brackets For Gigapintos

    LaserBit Giga Series 4.3 page 24 9.2 Mounting brackets for GigaPINTOs Laserbit GigaPINTO provides the following mounting bracket for . A simple fixing technique of this bracket can be seen on the following figure, required tools are as follows: drilling machine...

  • Page 25: Mounting Brackets For Gigaprontos

    Brackets can be found on this CD, feel free to modify or manufacture them, however the sale of the bracket drawings is strictly restricted. To help you to design your own brackets Laserbit recommends the following, Material:DIN1.0034...
  • Page 26 LaserBit Giga Series 4.3 page 26 Push the holder frame against the wall on the desired place Mark the place on the wall with permanent marker of pencil Drill the holes Clean the holes Place the small bag into the cleaned hole...

  • Page 27: System Installation

    LaserBit Giga Series 4.3 page 27 10 System installation 10.1 On the table test Warning! Do not look either into the transmitter or the receiver optics because at this distance even the reflected laser beam can be dangerous to your eyes.

  • Page 28: Gigapico Systems

    LaserBit Giga Series 4.3 page 28 10.2 GigaPICO systems 10.2.1 How can you install the ODIU? Functionalities of the ODIU The outdoor interconnection unit (ODIU) provides the power supply and data connection for the head. The power connection (+8VDC, GND, -8VDC and +30VDC).
  • Page 29 LaserBit Giga Series 4.3 page 29 Installing the ODIU box The physical fixing of the ODIU box can be seen below. Necessary toolkit: • Philips screwdriver • 5mm wrench • Drilling machine with an Ø8mm bit (the minimum effective length is 50mm) First you have to fix the ODIU box to the metal plate: •...

  • Page 30: Fixing The Heads

    LaserBit Giga Series 4.3 page 30 Connecting the head to the ODIU, and the ODIU to the power supply Ensure that the cables are connected as it seen below. For the power connection recommended to u three-wired Ø0,75mm cables. The order of the connection can be seen on the figure.

  • Page 31: Alignment Of The Heads

    LaserBit Giga Series 4.3 page 31 10.2.3 Alignment of the heads • Target Side B with the crosshair built in to the head on Side A • Repeat the first step with Side • Power up the heads! • Screw the three nuts up tight on...
  • Page 32 LaserBit Giga Series 4.3 page 32 • After the heads are lined up with the sighting device, you have lined the units into a negligent position • Following the LED’s you might require some fine alignment! Depending on the distance this can be small or large movements.

  • Page 33: Connecting To Your Network

    LaserBit Giga Series 4.3 page 33 Hands tighten the two bolts. Tight the front bolt with a 10mm spanner and look at the readings on the receiver, if the receiving level start decreasing again, start using the bolt on the rear and tighten it with the spanner, and reach the maximum again.

  • Page 34: Connecting To The Management

    LaserBit Giga Series 4.3 page 34 10.2.5 Connecting to the management You have a TC head Using RJ11 Service Connector and the two green connectors you can connect your management indoor unit to the head. The necessary signals can be found on the blue and blue-white wires of the head power cable.

  • Page 35: Gigapinto Systems

    LaserBit Giga Series 4.3 page 35 10.3 GigaPINTO systems 10.3.1 How can you install the ODIU? Functionalities of the ODIU The outdoor interconnection unit (ODIU) provides the power supply and data connection for the head. The power connection (+12VDC, GND, -12VDC).
  • Page 36 LaserBit Giga Series 4.3 page 36 Installing the ODIU box The physical fixing of the ODIU box can be seen below. Necessary toolkit: • Philips screwdriver • 5mm wrench • Drilling machine with an Ø8mm bit (the minimum effective length is 50mm) First you have to fix the ODIU box to the metal plate: •...

  • Page 37: Fixing The Heads

    LaserBit Giga Series 4.3 page 37 Connecting the head to the ODIU, and the ODIU to the power supply Ensure that the cables are connected as it seen below. For the power connection recommended to use three-wired Ø0,75mm cables. The order of the connection can be seen on the figure.

  • Page 38: Alignment Of The Heads

    LaserBit Giga Series 4.3 page 38 10.3.3 Alignment of the heads • Target Side B with the crosshair built in to the head on Side A • Repeat the first step with Side B! • Power up the heads! • Screw the three nuts up tight on both heads,...
  • Page 39 LaserBit Giga Series 4.3 page 39 • After the heads are lined up with the sighting device, you have lined the units into a negligent position • Following the LED’s you might require some fine alignment with the spacers which you can see in the figure! Depending on the distance this can be small or large movements.

  • Page 40: Connecting To Your Network

    LaserBit Giga Series 4.3 page 40 10.3.4 Connecting to your Network You have a TC head You can find a two sided fibre connector in your ODIU. You have to connect the fibre cable of your head into the one side of...

  • Page 41: Gigapronto Systems

    LaserBit Giga Series 4.3 page 41 10.4 GigaPRONTO systems 10.4.1 How can you install the ODIU? Functionalities of the ODIU The outdoor interconnection unit (ODIU) provides the power supply and data connection for the head. The power connection (+12VDC, GND, -12VDC).
  • Page 42 LaserBit Giga Series 4.3 page 42 Installing the ODIU box The physical fixing of the ODIU box can be seen below. Necessary toolkit: • Philips screwdriver • 5mm wrench • Drilling machine with an Ø8mm bit (the minimum effective length is 50mm) First you have to fix the ODIU box to the metal plate: •...

  • Page 43: Fixing The Heads

    LaserBit Giga Series 4.3 page 43 Connecting the head to the ODIU, and the ODIU to the power supply Ensure that the cables are connected as it seen below. For the power connection recommended to use three-wired Ø0,75mm cables. The order of the connection can be seen on the figure.

  • Page 44: Alignment Of The Heads

    LaserBit Giga Series 4.3 page 44 10.4.3 Alignment of the heads • Target Side B with the crosshair built in to the head on Side A • Repeat the first step with Side B! • Power up the heads! • Screw the three nuts up tight on both heads,...
  • Page 45 LaserBit Giga Series 4.3 page 45 • After the heads are lined up with the sighting device, you have lined the units into a negligent position • Following the LED’s you might require some fine alignment with the spacers which you can see in the figure! Depending on the distance this can be small or large movements.

  • Page 46: Connecting To Your Network

    LaserBit Giga Series 4.3 page 46 10.4.4 Connecting to your Network You have a TC head You can find a two sided fibre connector in your ODIU. You have to connect the fibre cable of your head into the one...

  • Page 47: Outdoor Interconnection Unit With Heater

    LaserBit Giga Series 4.3 page 47 10.5 Outdoor interconnection unit with Heater As an optional glass heater can be ordered for the link, the idea is the same what is used for the cars back window heater. This automated heater turns on and removes the ice from the front window only below 5 ºC(±2ºC).

  • Page 48: Vdc Power Supply Connections

    LaserBit Giga Series 4.3 page 48 10.6 48 VDC Power supply connections In fact the 48VDC power supply is optional, the connection is almost the same. In the case of the 48VDC power supply it is important to pay attention to the polarities.

  • Page 49: Warranty Conditions

    LaserBit Giga Series 4.3 page 49 Warranty conditions Laserbit Communications Corp. Laserbit warrants that the product purchased will free from defects in material and workmanship for a period of one (1) year from the date of purchase. This warranty period will not be extended by virtue of a repair of the product or a replacement of any component of the product during the warranty period.
  • Page 50 LaserBit Giga Series 4.3 page 50 purchaser or user shall be responsible for costs of return handling and transportation. Laserbit If the product does not operate as warranted above, the customer’s sole remedy shall be repair or replacement. The foregoing warranties and remedies are...

  • Page 51: Product Registration Form

    LaserBit Giga Series 4.3 page 51 11 Appendix A a. Product registration form Please take your time to fill out Laserbit product registration form to ensure your warranty period begins, otherwise Laserbit consider warranty beginning from the date of shipment from...

  • Page 52: Failure Report Form

    LaserBit Giga Series 4.3 page 52 b. Failure report form In case of failures please report it to us, and fill out the failure report form forward to your distributor!

  • Page 53: Gigapico Data Sheet

    LaserBit Giga Series 4.3 page 53 11.1 GigaPICO Data Sheet Light source Laser Diode Laser diode power (mW) 1x25 Detector APD photodiode Dynamic range >30 dB Bandwidth 1.25 Gbps < 10 System latency < 50 ns Data In/Out MM fiber SX inerface at 850nm with SC connectors (SM LX...

  • Page 54: Gigapinto Data Sheet

    LaserBit Giga Series 4.3 page 54 11.2 GigaPINTO Data Sheet Light source Laser Diode Laser diode power (mW) 2x25 Detector APD Photodiode Dynamic range >30 dB Bandwidth 1.25 Gbps < 10 System latency < 50 ns Gigabit Ethernet MM fiber SX inerface at 850nm with SC connectors (SM LX...

  • Page 55: Gigapronto Data Sheet

    LaserBit Giga Series 4.3 page 55 11.3 GigaPRONTO Data Sheet Light source Laser Diode Laser diode power (mW) 4x25 Detector APD Photodiode Dynamic range >30 dB Bandwidth 1.25 Gbps < 10 System latency < 50 ns Gigabit Ethernet MM fiber SX inerface at 850nm with SC connectors (SM LX...

This manual is also suitable for:

GigapicoGigapintoGigapronto

Table of Contents