Summary of Contents for Doremi Labs HDVI-20d
- Page 1 HDVI-20d User’s Manual Version 1.50 (12/2005) Doremi Labs, Inc. Burbank, California...
-
Page 2: Table Of Contents
Picture Settings ........................11 OSD Settings ..........................11 SDI Settings ..........................11 Output Settings ........................12 Miscellaneous Menu ......................12 Troubleshooting..........................12 Firmware Upgrade..........................13 Wiring of the HDVI-20d RS422-PC cable ................14 Recommended LCD Monitors.......................15 Note about the Viewsonic VP2290b ..................15 Note about the Apple Cinema Displays................15 Specifications..........................16... - Page 3 Doremi serial numbers as proof of date of the original retail purchase. You will also need to contact Doremi Labs technical support to receive a return authorization number (RMA).
- Page 4 If the Customer desires to transfer the license in connection with a sale of the Doremi Labs equipment being purchased by another Customer, the Licensor hereby consents to the assignment of the license provided (a) such sale otherwise complies with the terms of this agreement and applicable law and (b) the transferee reads and agrees to accept the terms and conditions of the agreement.
- Page 5 8. Limitation of Remedies. The Licensor shall not, under any circumstances, be liable to the Customers for any indirect, consequential or incidental damages arising out of the use, or results of use of, the software and documentation or otherwise relating to the functioning thereof or arising out of any breach of this agreement by the Licensor, even if the licensor has been advised of the possibility of such damages.
- Page 6 • EN 55022 "Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment." A "Declaration of Conformity" in accordance with the above standard has been made and is on file at Doremi Labs, Europe, Valbonne, France.
-
Page 7: Description
(Plasma, DLP, D-ILA etc.). The HDVI-20d is an easy to use plug-and-play box that allows the use of much lower priced DVI monitoring for SD and HD pictures. Set-up and operation are easy, as they should be. But to ensure that the images look good always, Doremi has focused attention on the technical detail of the many facets of the conversion process. -
Page 8: Hdvi-20D Operation
TV/Video + 7 => 1920x1080 o TV/Video + 8 => 1920x1200 o TV/Video + 9 => 1080i • In case of a TV set that reports 1080i, the HDVI-20d will output a compliant 1080i signal and the TV will display it properly. 3.2 Frequency The default frequency is 60Hz because it works with all displays. -
Page 9: Supported Output Resolutions
4 Supported Output Resolutions The HDVI-20d supports all progressive scan resolutions up to 1920x1200; it also outputs 1080i for TV sets. 5 Supported Input Resolutions Input Resolution HD-SDI All HD formats, NTSC, PAL, 2K-psf, 2K-p and 720p-50, 422 (Link-A) or 444... -
Page 10: Osd And Remote Control Functions
By default, the HDVI-20d infrared (IR) controls are unlocked. To lock, press “MUTING” for 4 seconds. The same process can be used to unlock the IR controls. The lock state of the HDVI-20d is saved even if the unit is turned off. Please make sure the included IR remote is in TV mode and not in Cable mode by pressing the TV button. -
Page 11: Restore I/O Settings
6.1 Restore I/O settings This mode is very important should you lose track of the I/O settings of the HDVI-20d. When the I/O settings are restored, the HDVI-20 output will be set to 1280x720-59.94. The input will be set to Pattern and the unit will output color bars. -
Page 12: Output Settings
-Auto (default): Use with all monitors up to 1920x1200. If the monitor reports a bad Resolution or unsupported resolution, the HDVI-20d will default to 1280x1024. In the case where this same monitor does not support 1280x1024, the output resolution can be forced using the infrared remote control and without the OSD interface by using the TV/Video + Number combination (see paragraph 3.1) -
Page 13: Firmware Upgrade
5. Enter the binary file name of the HDVI-20 bin file and hit ENTER 6. The screen will start showing you progress and it will quit after the upgrade is over. 7. Recycle power on the HDVI-20d and go to the last menu and make sure the new firmware is installed. -
Page 14: Wiring Of The Hdvi-20D Rs422-Pc Cable
8.1 Wiring of the HDVI-20d RS422-PC cable HDVI-20s V1 DB9-F mini DIN8-M Front View Front View SIG GND Frame GND Frame GND... -
Page 15: Recommended Lcd Monitors
CRT reference monitors that are priced over $30,000 US Dollars. 9.2 Note about the Apple Cinema Displays All Apple cinema displays are supported by the HDVI-20d except for the 30”. The Apple displays support 60Hz frequency only. Frame Sync Mode should not be set with these monitors; the HDVI- 20d will display all input resolutions at 60Hz. -
Page 16: Specifications
10 Specifications INPUT SMPTE 259M-C (270Mbps) and SMPTE 292M (1.485, 1.485/1.001 Gbps) NTSC, PAL, 720p @ 60, 59.94 and 50Hz 1080p @ 30, 29.97, 25, 24 & 23.98Hz, 1080i @ 60, 59.94, 50, 48 & 47.95Hz 2K-p & 2K-psf @ 23.98 & 24Hz (2048x1080) OUTPUT DVI (Digital RGB) and DVI-HDTV (Digital RGB with HDTV resolution/frame rate) up to 1920x1200 progressive scan and 1080i formats.
Need help?
Do you have a question about the HDVI-20d and is the answer not in the manual?
Questions and answers