Connections; Connecting To A Tv - LG DVD-3030N Owner's Manual

PAGE 12

CONNECTIONS

Connecting to a TV

Connect the DVD player to your TV
DIGITAL
OUT
COAXIAL
DIGITAL
OUT
S-VIDEO
OPTICAL
OUT
To S-VIDEO OUT
The component video connections supply component signals (Y, Pb, Pr) to video
equipment equipped with component video input connections. If your TV receiver has
component video inputs, it is highly recommended that you use a component video
cable (not supplied) to obtain the full benefit of DVD's superb picture quality. (The
picture quality obtained using component video is even better than that of S-video.)
Notes
Refer to the owner's manual of your TV as well.
When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted
because DVD video discs are copy protected.
Warning
Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the DIGITAL OUT jack of this
DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well
as the speakers. (Refer to "Selecting Digital Audio Output" on page 36.)
AUDIO AUDIO
COMPONENT
OUT2 VIDEO OUT OUT1
L Pb L
R Pr R
To AUDIO OUT (L/R)/VIDEO OUT
Y
VIDEO
OUT
To COMPONENT
VIDEO OUT
For using COMPONENT VIDEO OUT and S-VIDEO
OUT jacks, you must set "TV Out Select" at the SETUP
menu. (See page 35)
If the TV has an S-video input, connect the
DVD player with the S-video cable.
Video cable (Y, Pb, Pr) (not supplied)
S-video cable (Not supplied)
Audio/Video cable
(supplied)
To video input
To S-video input
TV or monitor with
audio/video inputs
To audio inputs