ABB HT563896 Operation Manual page 22

Operation Manual / 2 Safety / A130 - A155
1 Safety
Hot surfaces on the non-insulated turbocharger
Non-insulated turbochargers can cause serious injuries to personnel (burns).
ABB Turbo Systems supplies the turbocharger with or without insulation in
WARNING
accordance with the purchase order received from the enginebuilder. If sup-
ply is without insulation, the enginebuilder is responsible for providing the
turbocharger with proper insulation and for providing protection against con-
tact with hot surfaces.
Compliance with the instructions and specifications given by the en-

ginebuilder to protect against hot surfaces is compulsory.
Wear safety gloves to protect against thermal hazards.
Hazards due to rotating parts
Physical hazards
Contact with rotating parts can cause severe injury. The turbocharger must
never be used without the filter silencer or the air suction branch. With the
WARNING
engine stopped, the rotor can rotate due to the stack draught alone.
Operate the turbocharger in compliance with the specifications.

Secure the rotor against unintentional rotation during maintenance.

Wear safety gloves to protect against mechanical hazards.
Hazards due to electrical installations (if present)
Dangers during work on electrical installations
Electrical installations use voltages that can lead to severe injury to person-
nel or accidents resulting in fatalities.
WARNING
At the same time, electrical or electronic components and parts can also be
damaged or destroyed.
Only specially trained personnel should perform work on, or with, electri-

cal components.
Observe national regulations.

© Copyright 2016 ABB. All rights reserved. HZTL4022_EN
Page 12 / 18
Revision C May 2016