Advertisement
Connect the included USB 3.1 cable to the USB to PC Micro-B port on the back of the ST100 RGB headset stand. Connect the opposite end to a USB port on your PC. After connecting to your PC, we recommend installing the CORSAIR Utility Engine (CUE) to ensure you have the latest firmware and drivers.
Two high speed USB 3.1 (Gen 1) ports are included. These ports are backwards-compatible with all USB 2.0 devices.
Note: In order to realize USB 3.1 performance, the USB port on your PC must also support USB 3 or higher specifications. Otherwise, performance is limited to the USB specifications of your PC.
A 3.5mm headset jack provides compatibility with any headset or headphone that has a 3.5mm analog connector. 7.1 virtual surround sound can be enabled using the CORSAIR Utility Engine (CUE).
A total of 9 fully customizable RGB LED zones are available using the CORSAIR Utility Engine (CUE).
Using the CUE software will enable the full feature set of the ST100 RGB headset stand.
Note: if the stand is used without software, some features will be disabled.
You can use it to:
The software's built-in documentation explains how to use the ST100 RGB headset stand's features in greater detail.
CORSAIR COMPONENTS, INC.
47100 BAYSIDE PARKWAY, FREMONT, CALIFORNIA, 94538, USA
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Corsair ST100 RGB - Headset Stand with 7.1 Surround Sound Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the ST100 RGB that isn't answered in the manual? Leave your question here.