1. Manuals
  2. Brands
  3. Bluewater Manuals
  4. Plumbing Product
  5. APALA
  6. Instructions for the assembly

Bluewater APALA Instructions For The Assembly

3-way pull-out kitchen filter tap
Hide thumbs
1
2
3

Advertisement

Table of Contents

INSTRUCTIONS FOR THE ASSEMBLY OF THE
APALA 3-WAY PULL-OUT KITCHEN FILTER TAP
1) PLEASE NOTE
Before installing the tap, make sure that the pipes
are connected correctly supplying hot & cold water.
If you are in front of the faucet, the hot water out-
let should be on the le side and the cold water
outlet on the right side.
Make sure the water supply system is equipped
with strainers to ensure that no dirt, such as sand,
rust, limescale or other has entered the tap head.
Make sure there is a 35mm hole in the worktop or
sink.
sales@threewaytaps.com
tel - 01403 701988

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the APALA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bluewater APALA

  • Page 1 INSTRUCTIONS FOR THE ASSEMBLY OF THE APALA 3-WAY PULL-OUT KITCHEN FILTER TAP 1) PLEASE NOTE Before installing the tap, make sure that the pipes are connected correctly supplying hot & cold water. If you are in front of the faucet, the hot water out- let should be on the le side and the cold water outlet on the right side.
  • Page 2 PAGE 2 Insert the O-ring into the ring of the tap body. Insert the faucet body with the gasket into the opening in the countertop or sink. From the bo om, put a rubber and metal washer on the thread of the tap and screw on the clamp nut.
  • Page 3 PAGE 3 Screw the hose weight to the second hose as shown in the image above. A er connec ng all the hoses, open the water to test, making sure the connec on are ght. Before using the tap for the first me, unscrew the pull-out spout and rinse the tap. A er flushing, screw the spout p back into place.

Table of Contents