Advertisement
Quick Links
NOTE: Please make sure
the Wings of the T-Bar
Bracket are completely flush
with the ceiling board.
STEP10
Put the Power Cable and Ethernet Cable down through the
center hole of the T-bar and connect it to the Camera.
STEP 11
Put up the installed T-Bar Bottom Mount with Camera into the
ceiling opening.
P/N 2300-0716
5
7
STEP 12
Tighten the screws to fix T-Bar Bottom Mount on the T-Bar Bracket.
STEP 13
Fix the Trim Ring to the T-Bar Bracket.
Communicate via
Quick Installation Guide
In-Ceiling (T-Bar) Mount Kit
Model No.: C5234
V1.0
6
w w w . m i c r o n e t . c o m . t w
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for MicroNet C5234
- Page 1 Put up the installed T-Bar Bottom Mount with Camera into the ceiling opening. Communicate via Quick Installation Guide In-Ceiling (T-Bar) Mount Kit Model No.: C5234 V1.0 P/N 2300-0716 w w w . m i c r o n e t . c o m . t w...
- Page 2 STEP 1 Here lists the items and tools needed to mount the Speed Dome Camera into the ceilings. Remove the outdoor sunshield by removing the screws on the Package Contents top. Lock Bar x1 M3x6 Screw x2 Ceiling Sticker x1 Trim Ring x1 Indoor base x1 STEP 2...
Need help?
Do you have a question about the C5234 and is the answer not in the manual?
Questions and answers