Sending Programs To A Combi - Cleveland Convotherm PC-Control Operating Instructions Manual

Operating Instructions
3.4 Using the Cookbook

3.4.1 Sending Programs to a Combi

• Click Send.
• All the Combis registered in the CONVOTHERM PC-HACCP software are listed and
marked in the left-hand area of the window.
• A Program can be sent to a Combi by clicking on the Status icon.
1. Select transmission type:
• Send.
• Send + Start.
• Send + Autostart.
o When using Send + Autostart, set the time information in h.min or at
h.min.
2. Select the Program to be sent:
• All programs.
• Marked program(s) (see Tips+Tricks).
• Program number (specify number).
3. Start the transmission to the desired Combi by clicking Send.
4. After the transmission click Cancel to quit the window.
10 July 2006
3. CONVOTHERM PC-Control
CONVOTHERM PC-Control
page 8