Model Definition Model definition Copyright 2009 by AVIS All rights reserved.
Page 7
Feature Of Product Copyright 2009 by AVIS All rights reserved.
Page 8
It will be able to control the whole operation condition with PC which it connect the RS232 Cable. Auto Display / Menu Button Power Switch It is the main power switch. DC Power Input DC 24V, 2.5A Adaptor Copyright 2009 by AVIS All rights reserved.
Page 9
Auto mode A : Auto mode A operate the lamp turn ON and OFF as waiting time by turns. Auto mode B : Auto mode B operate the lamp turn ON and OFF as setting level and waiting time.( it will able to save 32 ways. ) Copyright 2009 by AVIS All rights reserved.
Page 10
-Move cursor to right side when you press down button about 0.5second and then press up button. -If press menu button, display begin-end mode. Select LAMP 1,2,3,4. If you press LAMP4 twice, cursor move WAIT menu. Copyright 2009 by AVIS All rights reserved.
Page 11
-Select Yes / No -If you want to save, press menu button. User mode set -User mode use that user specification save each lamp 1,2,3,4. -Select Disable / Enable. -If press menu button, save the mode. Copyright 2009 by AVIS All rights reserved.
Page 12
-If press menu button, display the next mode. Select LAMP 1,2,3,4. Save the user mode. -Select Yes / No. -If press menu button, save the mode. User mode Display -After user mode save, display LCD Display. Copyright 2009 by AVIS All rights reserved.
Page 13
RESET – System Reset Shot key – R key OPTION – Auto mode set Fan operation set Operation set User mode set Communication port set System Setup Firmware Upgrade Shot key – O key Copyright 2009 by AVIS All rights reserved.
Page 14
Set Lamp of Light Lux, wait time, begin No. and end No. Button Button Read - Read setting point of product. Read - Read setting point of product. Write - Save setting point to product. Write - Save setting point to product. Copyright 2009 by AVIS All rights reserved.
Page 15
Double Click – Set the point directly. [3] Cursor [4] Move cursor, Light Lux UP/DOWN Shot key –Move left or right. Move up or down (Light Lux UP/DOWN) [5] Present temperature. [6] Fan operation condition. Copyright 2009 by AVIS All rights reserved.
Page 16
Product Use Method Set between product and communication port. Set Max. or Min. brightness of each lamp. Update new firmware. Copyright 2009 by AVIS All rights reserved.
Page 17
Product Use Method Copyright 2009 by AVIS All rights reserved.
128*64 Dot Graphic LCD PC Interface RS232C Power supply DC 24V / 2.5A Power consumption (W) Max. 35W(at Total on) -10˚C ~ +50˚C Operating Temperature Dimension 179.5 * 160 * 45 (WHD, mm) Copyright 2009 by AVIS All rights reserved.
Need help?
Do you have a question about the IPL-L30 Series and is the answer not in the manual?
Questions and answers