Structure Of The Solarx 2 Helmet; Outer Shell; Outer Shell Edging Finish - ICARO 2000 Solar X 2 Owner's Manual

Table of Contents

Advertisement

Icaro 2000 – Exclusive Sports Helmets
Solar X 2 owner's manual
31/03/22
In fact, if these helmets are worn without headphones, a large portion of the contact surface, which contributes
considerably to the helmet's stability on the head, is missing.
So if you try on the helmet with the headphone cups in the open position, the helmet will feel unstable.
In addition, the headphones are part of the certification, and so a helmet of this type worn without
headphones cannot be considered as certified.
Structure of the Solar X 2 helmet

Outer shell

Solar X 2 is made with an outer shell in 3mm polycarbonate to ensure the highest possible
o
standards of safety. Polycarbonate gives the outer shell high perforation resistance,
strength, elasticity, and lightness. The photo below shows the two outer shells, for sizes
54-59 on the left, for sizes 60 and 61 on the right. The smaller outer shell is 222 mm in width,
the larger version is 236 mm in width. A minimal difference, just 14 mm. But this was essential
for passing the stringent impact tests required for EN 966 certification.

Outer shell edging finish

We have improved the finish of Solar X 2 by developing a method of sewing a fabric strip
o
around the edge of the outer shell, instead of the conventional rubber edging strip. The result
is unique, durable and very attractive.
5
Page
#5/
15
SolarX2EN1

Advertisement

Table of Contents
loading

Related Products for ICARO 2000 Solar X 2

Table of Contents