EVOLUTION MEASUREMENT EvoScann CANDI ELE-CANDI-CANDI01 Product User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

EvoScann® CANDI

Evolution Measurement Ltd

CANbus to USB Converter

Revision History:

Issue: 1 Revision: 0

Issue: 1 Revision: 1

Product User Guide

EvoScann® CANDI

(P# ELE-CANDI-CANDI01)

P a g e

First issued – August 2020

Updated Logging Information / GUI Info

Doc.No: M-90223 Iss.1 Rev 1

| 1

Table of Contents

Need help?

Do you have a question about the EvoScann CANDI ELE-CANDI-CANDI01 and is the answer not in the manual?

Questions and answers

Summary of Contents for EVOLUTION MEASUREMENT EvoScann CANDI ELE-CANDI-CANDI01

Page 1 CANbus to USB Converter (P# ELE-CANDI-CANDI01) Revision History: Issue: 1 Revision: 0 First issued – August 2020 Issue: 1 Revision: 1 Updated Logging Information / GUI Info ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e...
Page 2: Table Of Contents
Electrical Connection Operation……………………..………………………………………………….…..8 Maintenance……………………………………………..…………………………..8 General Information Safety Information Fault finding Repair and Recalibration Storage and Disposal…………………..……………………………………..……9 Storage Disposal GUI - Graphical User Interface Use………………………………………………10 ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e...
Page 3: Introduction
Electrical connection can be made to the EvoScann® P-Series Pressure Scanner either via the green 4-way terminal block or fixed ASX Circular Connector. Note, only one scanner should be attached at a time, using only one connection method. ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e...
Page 4: Specification
PEAK-System Installation Package (Supplied) National Instruments™ Runtime Engine (Supplied) Software: Evolution Measurement Node Tool (P-Series Specific) Dimensions: Outer case: 85 x 75 x 20 mm ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e...
Page 6: Installation & Use
Refer to the supplied USB Drive for files and Readme.txt regarding installation of the Drivers and GUI version before any connection to the EvoScann® P-Series Pressure Scanner is attempted. ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1...
Page 7: Electrical Connection
Electrical Cable Identification Cable Identification YELLOW CANH GREEN CANL SUPPLY (VSUP) BLACK (Note: Check direction indication marked on the one fitted to your CANDI) ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e...
Page 8: Operation
Below is a screenshot of a typical display from the EvoScann® GUI, with EvoScann® (P-Series P8-A for information). Refer to Section 7 for use. ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e...
Page 9: Maintenance
Field repair is not possible with EvoScann® CANDI. All repairs must be carried out by Evolution Measurement Ltd. To ensure optimum service and performance, return to Evolution Measurement Ltd. See contact us page. ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1...
Page 10: Storage And Disposal
Disposal At end of life, dispose of EvoScann® CANDI in full accordance with all local procedures and practices, or return the unit to Evolution Measurement Ltd for disposal. Do not incinerate as the product may emit noxious fumes. ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1...
Page 11: Gui - Graphical User Interface Use
Length – 8 Byte / 7 Byte (8 Byte Default) Range – Selected Range Pressures – Shows live channel pressures in selected pressure range mode ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e...
Page 12 BAUD – Allows rate to be set – Sensor ID Number (>=Ver 10 Firmware Required) nBYTE – 8 Byte / 7 Byte (8 Byte Default) ID – User configurable (Hexadecimal) PCAN – Period Setting Options ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e | 12...
Page 13 Press the file icon, the route path can now be set for the log file. Click Sensor Number to create individual log file… Record – Starts the current log file / Logging - Stops the current log file. ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e...
Page 14 Evolution Measurement Ltd 7 Regents Court, South Way, Walworth Business Park, Andover, Hampshire SP10 5NX, UK Telephone: +44 (0) 1264 316470 Email: enquiries@evolutionmeasurement.com www.evolutionmeasurement.com ©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1 P a g e | 14...