Above All 10228 Instruction Manual

SUITABLE FOR MODEL
IMAGE MAY VARY FROM ACTUAL PRODUCT
SAFETY INSTRUCTION
READ CAREFULLY BEFORE INSTALLING FIXTURE. PLEASE KEEP THIS MANUAL FOR FUTURE USING.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
MAKE CERTAIN POWER OFF BEFORE INSTALLING OR MAINTAINING FIXTURE.
CHECK THAT VOLTAGE IS COMPATIBLE WITH FIXTURE DRIVER, USE APPROVED CONNECTORS FOR
ALL ELECTRICAL CONNECTIONS.
MAINTENANCE CAUTION
1. Review the wire connection before beginning, and make sure fixture is grounded properly.
2. For lighting controls, using functioning correctly.
3. Turn power off and wait for fixture cooling to operate.
4. Maintenance must be done by professionals.
WIRE CONNECTION
Universal voltage driver permits operation at 120V-277V 50 or 60Hz
Connect supply wires to quick connect supplied Black/ Hot supply black. White/ Neutral supply with white wire.
Connect ground wire with green wire.
Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abblighting.com
Web: www.aboveallLighting.com ©2016 ABOVE ALL, Inc. All rights reserved
FIXTURE
LED Flood Light
Instructions Manual