Above All MT Series Instruction Manual

SUITABLE FOR MODEL
IMAGE MAY VARY FROM ACTUAL PRODUCT
SAFETY INSTRUCTION
READ CAREFULLY BEFORE INSTALLING FIXTURE. PLEASE KEEP THIS MANUAL FOR FUTURE USE.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
MAKE CERTAIN POWER IS OFF BEFORE INSTALLING OR MAINTAINING FIXTURE.
CHECK THAT VOLTAGE IS COMPATIBLE WITH FIXTURE DRIVER. USE APPROVED CONNECTORS FOR
ALL ELECTRICAL CONNECTIONS.
Maintenance Caution
1. Review the wire connection before beginning, and make sure fixture is grounded properly.
2. For lighting controls, follow control instructions carefully.
3. Turn power off and wait for fixture to cool before performing maintenance.
4. Maintenance must be done by professionals.
WIRE CONNECTION
Only For 300W AR
Add: 1501 Industrial Way N. Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abblighting.com
Web: www.aboveallLighting.com ©2016 ABOVE ALL, Inc. All rights reserved
LED MT AREA LIGHT / FLOOD LIGHT
For TR&SF 100W/150W/200W/300W
Instruction Manual
1