Raycon The Work Earbuds Ultra RBE785 Manual

INTRODUCTION

Before using your product, we strongly encourage you to fully read through this user manual. You can also visit our support center at www.rayconglobal.com/support.

This web page has more specific guidelines and helpful videos for you to navigate your product.

For the best performance, charge fully before first use.

Pairing ID: The Work Earbuds Ultra

UNIT AT A GLANCE

Case

1. Reset Button
2. LED/Battery Indicator
3. Wireless Charging Capsule
4. Charging Port
5. Lanyard Hook

Earbuds

1. Sensor
2. Charging Connectors
3. Microphone
4. Foam/Gel Tip
5. Touch Control

QUICK START GUIDE

1. Take your earbuds out of the charging capsule. Both earbuds will power on and connect to each other automatically.
   
2. From the source device, go to Bluetooth settings and ensure Bluetooth is on. Search for "The Work Earbuds" and select it to pair.
   
3. Enjoy your Raycon Work Earbuds Ultra!

FUNCTIONS

Control audio and other functions by tapping the logo on the earbud.

		Tap for Volume Up
		Tap for Volume Down
		Tap / 2 times for Play/Pause
		Tap 3 times for Next Song
		Tap 3 times for Previous Song
		Tap / 4 times for Voice Assistant
		Hold for 3 secs to activate Equalizer Mode
		Hold for 3 secs to toggle Awareness & ANC Mode
		Tap / 2 times to Answer/End call.
		Hold / for 3 secs to Reject call.
		Place earbuds in capsule, close lid, and remove from capsule to Power On.
		Hold / for 10 seconds or place earbuds in charging capsule to Power Off.

SOUND PROFILES

Your sound, your way! As our sound profiles were crafted by artists and producers at the top of the industry, you're in good hands.

BALANCED SOUND - A leveled sound that is great for all around performance and clarity.

BASS SOUND - Our bass boosted sound, great for songs with strong beats and a go-to for bass lovers.

PURE SOUND - Our most refined sound, perfect for hearing every single note.

Hold for 3 secs to activate Equalizer Mode to toggle between sound profiles.

AWARENESS & ANC MODE

AWARENESS MODE

Hear what's happening around you.

ANC MODE

Focus and block out unwanted outside noise.

Hold for 3 secs to activate Awareness & ANC Mode and toggle between modes.

SMART DETECTION

Built-in sensors will pause the music/video automatically if one earbud is removed. Once you put your earbuds back in, the music/video will resume.

CHARGING YOUR DEVICE

Charging Earbuds: The earbuds will charge automatically when placed in the capsule.

Capsule Fully Charged: Once fully charged, the battery indicator lights will stay on.

Call/Play time: about 8 hours

Total battery life: 32 hours

A fully charged capsule can completely recharge the earbuds up to 3 times before needing to recharge the capsule.

Wireless Charging: Simply place the capsule on any Qi-compatible charging mat.

Battery Status Indicator- After closing the lid of the charging capsule, the battery status indicator lights will display the remaining battery life.

Low-Battery Warning - When earbud batteries are low, a "low battery" voice prompt will play, and there will be 30 mins of playtime left before the earbuds automatically power off.

THE PERFECT FIT

1. Insert the earbuds into your ear.
   
2. Rotate the earbuds slightly forward.
   
3. The perfect fit should look like this.
   

GEL TIPS

Customize your fit. Select the right size gel tip for your ear size.

FOAM FIT TIPS

Memory foam tips conform to your ear canal, providing a secure fit and maximum sound isolation.

FACTORY RESET

FACTORY RESET – First, delete the "The Work Earbuds Ultra" from the Bluetooth settings on your device, and place your earbuds back in the capsule.

While earbuds are in charging capsule, press and hold the "Raycon" button 5 seconds or until the 4 battery indicator lights flash at the same time. Please ensure that the charging capsule has enough charge.

Close the charging capsule to complete the reset function.

Follow instructions in Quick Start Guide section to reconnect earbuds to Bluetooth device.

SAFETY GUIDELINES

Please follow the safety guidelines below at all times when operating or caring for your device.

• Be wary of any edges, uneven surfaces, and metal parts, including on accessories and product packaging, to prevent any possible injury or damage.
• Listen to music at a proper volume to avoid damaging your hearing and the earbuds.
• Do not store in high temperatures, such as in a hot vehicle or in direct sunlight.
• Do not expose the earbuds or any of its supplied parts to rain or other liquids for extended periods of time.
• Do not drop or cause undue impact to the earbuds.
• Do not modify, repair, or dismantle the product on your own.
• Do not use any diluent or volatile liquid to clean the product.
• Do not use the product in a hazardous location.

FAQ & ADDITIONAL RESOURCES

For frequently asked questions about your device, simply go to www.rayconglobal.com/support. Select your product to find additional resources on how to operate your product, including helpful tips and videos.

SUPPORT

If your device is not functioning correctly, please visit www.rayconglobal.com/support for customer support, and we will be more than happy to help you.

LIMITED WARRANTY

For more information and instructions on how to get warranty service, visit www.rayconglobal.com/warranty.

SPECIFICATIONS

• Model Number: RBE785
• Bluetooth Name: The Work Earbuds Ultra
• RDID: D785-0821
• Bluetooth version: 5.0
• Power Input: 5V/1A
• Capsule charging time: 1.5 hours
• Earbud charging time: 1.5 hours
• Call/Play time: About 8 hours
• Total battery life: About 32 hours
• Charging earbuds by capsule: 3 times
• Standby time: 6 Months
• Support Profiles: HSP/HFP/A2DP/AVRCP
• Sensitivity: 107±3dB
• Frequency Response Range: 20Hz-20KHz
• Bluetooth Range: Up to 10 Meters

FCC WARNING

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure statement.

The device can be used in portable exposure condition without restriction

IC CAUTION

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC ID:2AZOV-RBE785
IC: 27185-RBE785

@rayconglobal