output as well as Dual I/O SPI using pins: Serial Clock, Chip Select, Serial Data I/O0(DI), Serial Data
I/O1(DO). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of
instructions. These transfer rates are comparable to those of 8 and 16-bit Parallel Flash memories.
A Hold pin, Write protect pin and programmable write protection, with top or bottom array control,
provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and
device identification with a 4K-bit Secured OTP.
LGE Internal Use Only
LGE Internal Use Only
Copyright © 2012 LG Electronics. Inc. All right reserved.
25
O nly for training and service purposes
- 8 -
Copyright © 01 LG Electronics. Inc. All right reserved.
3. TECHNICAL BRIEF
3. TECHNICAL BRIEF
Only for training and service purposes