Panasonic TX-42LZ980B Operating Instructions Manual page 20

Connecting Bluetooth
Registering Bluetooth
This TV supports Bluetooth
Bluetooth ® devices that have been registered (paired)
with this TV can connect to (communicate with) this TV.
When registering (pairing) a Bluetooth
≥
this TV, move the device within 50 cm of the TV.
It is not possible to register (pair) Bluetooth
≥
that are not compatible with this TV.
If a Bluetooth enabled device that you have
≥ ®
registered (paired) with this TV is then registered and
used on another device, it may then be made
unavailable for use with this TV. Register the device
on this TV again if this occurs.
You can register Bluetooth
≥
support A2DP on this TV. Due to the characteristics of
wireless technology, there will be some delay between
the playback of video and audio.
A maximum of 2 audio devices that support A2DP can
≥
be used simultaneously. To use 2 devices, set [Dual
Audio] (Setup > Bluetooth Setup > Bluetooth Audio
Settings) to [On], and then connect the second device.
For details, refer to [eHELP] (Search by Purpose >
≥
Functions > Bluetooth devices).
20
English
devices
®
devices
®
communications.
®
device with
®
® devices
audio devices that
®
Registering the remote control
(supplied)
Either Bluetooth wireless technology or the infrared
®
communication function can be used for the
transmissions between the TV and the remote control.
Since voice controls (p. 24) use Bluetooth
technology, the remote control needs to be registered
(paired) with the TV.
When using the remote control for the first time after
≥
purchase, when you press any button while pointing
the remote control at the remote control signal
receiver with batteries inserted, the remote control is
automatically registered (paired).
When registering, face the remote control at the
≥
remote control signal receiver on the TV, within about
50 cm.
Registration may not be completed correctly if the
≥
batteries in the remote control are running low.
Remote control signal receiver
® wireless