Fig. 56: Fitting The Filter Silencer; Table 39: Tightening Torque (72004) - ABB XAC18427 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly / 8.14 Fitting the filter silencer
8.14.3 Fitting the filter silencer (cast)
If the turbocharger is also fitted with a noise package, chapter
noise package →84 must be observed.
Fig. 56: Fitting the filter silencer
Part number A165-L
72004 M14
130 Nm
Table 39: Tightening torque (72004)
1. Attach the lifting gear to the front lug and rear eyelet of the filter silencer (81000).
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.
u
© Copyright 2017 ABB. All rights reserved.
A170-L A175-L
M16 M18
200 Nm 300 Nm
HZTL4034_EN
Fitting the filter silencer with
A180-L A185-L
M20 M22
420 Nm 570 Nm
Revision K
A190-L
M24
710 Nm
June 2017