MERKURY TWS Earphone MI-E029T Manual
![]()
![]()
Please read before using this product
PAIR &CONNECT WITH A NEW DEVICE
- APOLLO will tum on automatically once it is removed from charging case. It will blink alternately red and blue Indicating that it is In pairing mode.
- Open the Bluetooth® menu on your smartphone and search for new devices.
- When you see "Merkury E029T" listed, tap it to connect.
- Once connected with your device, there will be a BEEP from the right earbud.
Charging
EARBUDS
- Checking the "R" and "L" indicators on the charging case, place the right and left earbuds into the corresponding slots so that the magnetic metal charging contacts line-up correctly.
- The LED indicators on the earbuds will glow red and the charging indicators on the case will glow blue. Your earbuds are now charging.
- Once your earbuds are fully charged the LED indicators will turn solid blue. After approximately 5 minutes the LED indicators will turn off.
CASE
- When the case is charging, the led light will slowly flash red. When charge is complete, the red light will turn solid
- Note: the case can charge the earbuds while charging itself.
PLAY&CALLS
- Connect your device to these earbuds via Bluetooth® (see "Pair & Connect with a New Device.")
- Open your favorite music app and press play.
- All audio, including music, calls, games, videos, and notifications will be routed through the earbuds.
RECONNECT TO YOUR DEVICE
- You only need to pair your Bluetooth® device with these earbuds once.
- With your device's Bluetooth® feature turned on and in range, power on the left & right earbuds.
- They will automatically connect to each other and to your smartphone
- If you have a previously paired device that does not auto-reconnect, navigate to the Bluetooth® settings menu on your device and select "Merkury E029T" from the list of paired Bluetooth® devices.
POWER ON/OFF
NOTE: Earbuds Turn On/Off automatically when removed from or returned to case.
- To power on manually, press and hold the power buttons for 2-3 seconds, the LED lights will begin to flash.
- To power off manually, press and hold the power buttons for about 8 seconds.
FEATURES
TRUE WIRELESS EARBUDS
![Merkury Innovations - MI-E029T - Earbuds Earbuds]()
CHARGING CASE
![Merkury Innovations - MI-E029T - Charging Case Charging Case]()
- Power On/Off
Play/Pause
Answer/End Call - Charging Connectors
- LED Indicator
- Power Button
- LED Charging Case Indicators
TROUBLESHOOTING
No power | Recharge your earbuds using the included battery charging case. |
Music is not playing over Bluetooth® | Make sure your Bluetooth® device has A2DP profile. Check if both devices are paired and connected over Bluetooth®. Restart the earbuds to reconnect your Bluetooth® device. |
Bluetooth® device will not reconnect with the earbuds | Navigate to your Bluetooth® settings menu on your Bluetooth® device, tap "Merkury E029T" and select "Forget." Now follow the steps to pair your device again. |
Specification
Bluetooth® Version: 5.0
Bluetooth® Range: Up to 30ft
Earphone Capacity: 30rnAh
Charging Input: Micro USB
Freq. Response: 20Hz - 20KHz
Charging Case Capacity: 350mAh
Charging Time: Approx. 2 Hours
Playback Time: Approx. 3-4 Hours*
Standby Time: Approx. 8 Hours
*Depends on individual use
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation
Technical Support
Please do not attempt to fix the product by yourself. If you are experiencing any problems with the product, please do not return It to the store you bought It from. You can contact our technical support representatives and they will assist you with any questions you might have For assistance operating your product, please consult the User's Manual first, then feel free to contact Merkury Innovations technical support:
Merkury Innovations
45 Broadway 3rd Fl. New York, NY 10006
www.merkuryinnovations.com
E-mail: support@merkuryinnovations.com
© 2020 Merkury Innovations LLC
To explore our full selection of products, visit us at: www.merkuryinnovations.com
The Bluetooth word mark and logo are registered trademarks owned by Bluetooth SIG, Inc. The illustrated product and specifications may differ slightly from those supplied. All other trademarks and trade names are those of their respective owners
Made in China
![]()
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download MERKURY TWS Earphone MI-E029T Manual
Need help?
Do you have a question about the MI-E029T and is the answer not in the manual?
Questions and answers