Table of Contents
Advertisement
Quick Links
Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch
Product Code: K30-2038CCTZ
Kit Contents
CCT dimming Zigbee wall switch
▪
Important Safety Information
DISCLAIMER: PLEASE NOTE INSTALLATION SHOULD BE CARRIED OUT BY A
QUALIFIED ELECTRICIAN!
• This Zigbee CCT wall switch is a wireless transmitter that communicates with a variety of ZigBee
compatible systems. This transmitter sends wireless radio signals that are used to remotely control a
compatible system.
• This Zigbee wall switch supports 4 groups for binding max. 30 lighting devices and enables to control
tuneable white Zigbee lighting devices.
• DO NOT install with power applied to the device.
• DO NOT expose the device to moisture.
Function Introduction
Advertisement
Table of Contents
Related Manuals for TLW VEW K30-2038CCTZ
Summary of Contents for TLW VEW K30-2038CCTZ
- Page 1 Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch Product Code: K30-2038CCTZ Kit Contents CCT dimming Zigbee wall switch ▪ Important Safety Information DISCLAIMER: PLEASE NOTE INSTALLATION SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN! • This Zigbee CCT wall switch is a wireless transmitter that communicates with a variety of ZigBee compatible systems.
- Page 2 Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch Product Code: K30-2038CCTZ Installation Zigbee Network Pairing through Coordinator or Hub (Added to a Zigbee Network)
- Page 3 Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch Product Code: K30-2038CCTZ Note: 1) After pairing successfully, the remote information will appear on the controller or hub interface. 2) No remote information will appear on the hub interface if pairing to Philips Hue Bridge. TouchLink to a Zigbee Lighting Device Removed from a Zigbee Network through Coordinator or Hub Interface From your ZigBee controller or hub interface, choose to delete or reset the remote as instructed,...
- Page 4 Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch Product Code: K30-2038CCTZ Remove a Touchlink Paired Zigbee Lighting Device Factory Reset a Lighting Device (Touch Reset)
- Page 5 Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch Product Code: K30-2038CCTZ Find and Bind a Zigbee Lighting Device Find and Unbind a Zigbee Lighting Device...
- Page 6 Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch Product Code: K30-2038CCTZ Clear All Find and Bind Mode Paired Lighting Devices of a Group Setup a Network & Add Devices to the Network (No Coordinator or Hub Required)
- Page 7 Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch Product Code: K30-2038CCTZ How to Check Whether the Remote Belongs to a Network or not Short press any other buttons except group buttons, indicator blinking means the wall switch has already been added to a network, no blinking of indicator means the wall switch does not belong to any network.
- Page 8 Product Name: Swipe CCT CCT LED Dimming Zigbee Wall Switch Product Code: K30-2038CCTZ Other Information Specifications: • Zigbee CCT wall switch based on ZigBee 3.0 • Full touch glass interface, smooth CCT and light intensity control • Enables to pair ZigBee lighting devices via touchlink commissioning without coordinator •...
Need help?
Do you have a question about the VEW K30-2038CCTZ and is the answer not in the manual?
Questions and answers