Subscribe to Our Youtube Channel
Related Manuals for decon INFM7015
Summary of Contents for decon INFM7015
- Page 1 Assembly Instructions INFM7015, INFM7115, INFM7215 Infinity Mounting set Invacare Action 5 Rigid Swing Away 2021-10 Revision 1...
- Page 2 An operation that, if not correctly performed, may lead to material damage. Particularly important or explanatory information General instructions These instructions shall always be followed when placing the mounting set INFM7015, INFM7115, INFM7215. To be able to connect Infinity to the wheelchair Infinity also needs to be adjusted according to the assembly instructions that is included in the delivery of Infinity.
- Page 3 Mounting set INFM7X02 __________________________________________________________________________________ 2. Overview A Center pipe adapter bar B Outer pipe adapter bar C Clamp adapter bar D Adapter plate E QR-Pin F Universal clamp G 19mm clamp __________________________________________________________________________________ Sida 3/8...
- Page 4 Mounting set INFM7X02 __________________________________________________________________________________ 3. Assembly and adjustment of adaptor First mount the adapter plate (F), universal clamp (F), wedge (I), sleeve (J), screw (K) and washer (L) onto the wheelchair. Tighten loosely so that the parts can move along the frame. Mount the 19mm clamp (G) around the frame using screw (K), washer (L) and locking nut (M) and tighten loosely.
- Page 5 Mounting set INFM7X02 __________________________________________________________________________________ Now mount the complete adapter bar that consists of center pipe (A), outer pipe (B) and clamp (C). The complete adapter bar is mounted into the adapter plates (D) by using the QR-pins (E). Make sure the ends of the outer pipe (B) are parallell otherwise it can be hard to assemble it into the holders...
- Page 6 Mounting set INFM7X02 __________________________________________________________________________________ Now use the leveling tool that is included in the delivery of Infinity. Since the adapter bar have splines inside it will not be possible to get the bubble of the spirit level exactly right. Just choose the most correct position. The leveling tool has two marks “H”...
- Page 7 Mounting set INFM7X02 __________________________________________________________________________________ Alt.2 Using the adjustment tool that is included in the delivery of Infinity (not this mounting set), set the angle of the adaptorbar. Only mount the inner pipe on one side and then rotate the center pipe to the correct angle. Now mount the other inne pipe in the same position/angle as the first one.
- Page 8 Mounting set INFM7X02 __________________________________________________________________________________ Decon Wheel AB Södra Ekeryd 119, SE-314 93 Hyltebruk, Sweden Tel: +46 (0)345 40880 Fax: +46 (0)345 40895 E-mail: info@decon.se __________________________________________________________________________________ Sida 8/8...
Need help?
Do you have a question about the INFM7015 and is the answer not in the manual?
Questions and answers