SNOWJOE SUNJOE 24V-CTC-LTE Operator's Manual

OPERATOR'S MANUAL
A Division of Snow Joe, LLC
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may result
in serious bodily injury or death.
General Safety
m
WARNING!
This power tool is not intended for use
by children or by unassisted, unsupervised persons whose
physical, sensory or mental capabilities prevent them from using
it safely. Children should be supervised to ensure that they do
not play with the appliance.
Before starting up your power tool, please check it carefully
for any defects. If you find any, do not start up your machine.
Contact your authorized Snow Joe
call the Snow Joe ® + Sun Joe
1-866-SNOWJOE (1-866-766-9563).
m
WARNING!
When using the power tool, basic safety
precautions should always be followed to reduce the risk of fire,
electric shock, and personal injury. These include:
1. Keep work area clean and well-lit – Cluttered, dark areas
invite accidents. Always inspect the area where the weed
sweeper is to be used. Remove all objects (i.e. stones,
sticks, and other foreign materials) that could be thrown by
the brush or cause the operator to trip.
2. Replacement parts – Inspect the weed sweeper for worn,
missing, or damaged parts. When servicing this unit,
use only identical replacement parts. Replace or repair
damaged parts immediately.
3. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe
distance away from the work area. Never leave the machine
running when unattended.
4. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls and
ensure they are functioning properly.
5. Use the right tool – Do not use this machine for any job
except that for which it was intended.
6. Transporting – Allow the brush to completely stop rotating
before transporting the unit. Do not carry the cordless weed
sweeper with your finger on the trigger.
Original instructions.
© 2022 Snow Joe, LLC. All rights reserved.
R
24V* CORDLESS WEED SWEEPER
150 W | 1 100 RPM
Model 24V-CTC-LTE
+ Sun Joe dealer or
® ®
® customer service center at
m
CAUTION!
Moving parts will continue to run for several
seconds after turning off the machine.
7. Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
8. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
9. Do not run – Never run while operating the tool.
10. Use two hands – Keep a firm grip on both handles to avoid
loss of control.
11. Foreign object – Look for hidden obstacles or hazards. If
the cordless weed sweeper strikes a foreign object, follow
these steps:
• Stop the weed sweeper.
• Inspect for damage.
• Repair any damage before restarting the tool.
12. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
protective rubber gloves, hearing protection and protective
covering to contain long hair.
13. Avoid slipping – Maintain proper footing and balance at all
times to avoid slipping or falling. Wear protective non-slip
footwear that will protect your feet and improve your footing
on slippery surfaces. Exercise caution when changing
direction and operating the tool on slopes.
14. Use safety glasses – Thrown objects can cause serious
injury to the eyes. Always wear safety glasses or eye
shields during operation and while making any adjustments
or repairs.
15. Remove the battery – Stop the weed sweeper and remove
the battery when it is not in use, before servicing it, when
changing accessories, and when performing any other
maintenance. Wait until the brush has come to a complete
stop and the housing has cooled down.
16. Store indoors – When not in use, the cordless weed
sweeper should be stored indoors in a dry and high or
locked-up place out of the reach of children.
17. Maintain the cordless weed sweeper with care –
Keep the brushes clean for optimal performance and to
reduce the risk of injury. Keep the handles dry, clean,
and free from oil and grease. Follow the additional
recommendations described in the maintenance section of
this manual.
*Initial no-load voltage, when fully charged, peaks at 24 volts;
1
Form No. SJ-24V-CTC-LTE-880E-M
nominal voltage under typical load is 21.6 volts.
SAVE THESE INSTRUCTIONS
EN