Summary of Contents for MH Corbin BLUESTAR NC350
- Page 1 NC350 BLUESTAR PORTABLE TRAFFIC ANALYZER User Manual M. H. Corbin, LLC.All rights reserved. For more information, please visit us at: https://www.mhcorbin.com...
- Page 2 The right to print or otherwise make available copies of the documentation is limited to the period during which the applicable license for such software remains in full force and effect. Should the license terminate for any reason, it is your responsibility to certify in writing to MH Corbin that all copies and partial copies of the documentation have been returned to MH Corbin or destroyed.
- Page 3 - INTRODUCTION Contents - INTRODUCTION.....................................3 1.0 INTRODUCTION TO THE NC350 ..........................3 2.0 BATTERY CHARGING AND STORAGE ........................ 3 3.0 COMMUNICATIONS ..............................4 4.0 BLUETOOTH COMMUNICATIONS RANGE ......................4 5.0 HDM SOFTWARE ..............................4 6.0 NC350 LED Indicators ..............................5 7.0 TROUBLESHOOTING TIPS ............................
- Page 4 3.0 COMMUNICATIONS The NC350, like the NC200 and NC300, can communicate with a computer using our “Communications Interface Adapter”; however the NC350 also has the added benefit of Bluetooth. There are 2 types of Programming and Data cables: - The old cable utilizes a DB9 connector which connects to the COM port on the back of your computer . - The new cable has a USB connector which will connect to any standard USB port on your computer.
- Page 5 6.0 NC350 LED Indicators The NC350 includes 3 LED indicators that are exposed through the clear window on the end of the unit. The LEDs indicate the status of the unit during programming and after the completion of a traffic study. The Bluetooth protocol requires that each computer used to communicate with the NC350 first go through a pairing process before being used to program or download a study.
- Page 6 When the NC350 is not connected to a charger and it has no LED indicators lit or blinking, one of the following conditions have been met: - No study has been programmed and the previous study has already been downloaded (ie, unit is sleeping) - A study is in progress.
Need help?
Do you have a question about the BLUESTAR NC350 and is the answer not in the manual?
Questions and answers