Kenwood LS-600BT Operating Instructions Manual page 23

Batteries
• If you do not use the Device for a month or longer, remove the batteries from the battery
compartment to prevent it from leaking. Immediately dispose of leaking batteries properly and
observe all relevant statutory regulations. Leaking batteries can cause injury and damage the device.
Never mix batteries of different types or old and new batteries.
Caution!
Risk of explosion
• if incorrect batteries are used;
• high or low extreme temperatures to which a battery may be exposed during use, storage or
transport;
• low air pressure at high altitude;
• if the batteries are disposed of in fire or in a heated oven;
• with mechanical crushing or cutting of a battery;
• when leaving a battery in an environment with extremely high temperatures or with extremely low
air pressure, which may cause an explosion or escaping of flammable liquids or gases.
To minimise the risk of electric shock, fire, etc. do not remove screws, covers or housing parts.
The power button does not completely disconnect the power supply in any position. In order to
completely disconnect the device from the mains adapter, please pull the mains adapter out of the
mains socket.
Risks associated with high volume
To prevent possible hearing damage, do not listen at high volume for long periods.
Protect your furnishings
This model is equipped with non-slip rubber feet which prevent the device from moving when you
operate the controls. The "feet" consist of a non-migrating rubber material specially developed
to not leave any marks or stains on your furnishings. Certain types of oil-based furniture polishes,
wood protection materials or cleaning spray can, however, lead to the rubber feet to soften, leaving
marks or rubber residues on the furnishings. To avoid damages on your furnishings , we urgently
recommend that you not purchase any self-adhesive felt pads, available everywhere in hardware
stores, and not to glue these on the underside of the rubber feet before installing the device.
Important
This Soundbar has been specially developed for LED/LCD/Plasma TVs. It should not be used in
combination with CRT TVs (Cathode Ray Tube TV's) to avoid image interference.
Automatic energy saving function
The device is equipped with an automatic energy saving function. This switches the device within
20 minutes to the standby mode, if no audio signal is received or there is no operation.
5