Nac RM03-000 Manual

Universal Rack Mounting 3-Slot
SECTION
GENERAL ................................................... 1
1.
APPLICATIONS ......................................... 1
2.
DESCRIPTION .......................................... 1
3.
INSTALLATION .......................................... 2
4.
CUSTOMER SERVICES ........................... 3
5.
WARRANTY AND REPAIRS .................... 3
6.
SPECIFICATIONS ..................................... 4
7.
ORDERING INFORMATION ...................... 4
8.
1. GENERAL
1.1 The NAC RM03-000 is a universal passive
connectivity solution for service demarcations or
inter-facilities termination points. The RM03-000
is a rack or wall mountable housing designed to
deliver multiple fiber services or a combination
of fiber and multi-media services using NAC's
VLX or LGX™ compatible adapter panels. The
RM03-000 mounting supports three (3) LGX™
compatible adapter panels.
1.2 Whenever this product or document is
changed, it will be reflected in this paragraph.
1.3 The RM03-000 provides the following
features and capabilities:
• Powder coated steel construction designed
for carrier class applications and
environments.
• Supports three (3) LGX™ adapter panels.
• Installation flexibility
o 1 RU height, 19" or 23" rack
o Flat, horizontal, or vertical wall
mountable.
o Adjustable wall mounting depth
• Dual ⅝" spaced ground studs
• Provides cable management, protection, and
security options.
LGX® is a registered trademark OFS FITEL, LLC
Model RM03-000
PAGE #
2. APPLICATIONS
2.1
service
Providers and the End-Users or a service
termination point between Facilities. The RM03-
000 is ideal for applications involving fiber or
multi-media service demarcation or termination
handoffs, such as cell sites, customer premises,
CEV, or OSP cabinets. The Service Provider
typically installs the RM03-000 at the customer
premises as a service demarcation for their
Carrier Ethernet services. The Service Provider
can place their Fiber Multiplexer at a desirable
location or distance.
3. DESCRIPTION
3.1
designed rack housing consisting of a front, side,
and bottom plates. The front plate has three (3)
slots, where each slot supports an LGX™
compatible adapter panel. The RM03-00 has 3
VLX-100 panels installed as shown above. See
section 8 for other ordering options. The RM03-
000 base plate has an opening to allow rear
cable and LGX™ panel access. The base plate
provides a ⅝" spaced dual ground studs for
grounding requirements, Figure 2.
side plates can support the mounting brackets or
ears in multiple positions and configurations for
rack and wall mounting installations.
details are shown in Section 4.
Page 1 of 4
Figure 1. RM03-000
The RM03-000 is typically used as a
demarcation between
The RM03-000 is a powder coated steel
RM03-000
001-0011 Rev.01
the Service
RM03-000
Further