Quilt Display Products E-Z Ancor Instructions

HANGING INSTRUCTIONS

CONTEMPORARY STYLE QUILT WALL SHELF

COMMITMENT TO EXCELLENCE

We want you to be pleased with our products and our service, so if you need verbal

assistance with the assembly or hanging of any of our quilt display products or if you have

any suggestions on what we can do to improve our service to you, please feel free to

By phone at (937) 506-0032, by e-mail at info@quiltdisplayproducts.com or by visiting

our website at www.quiltdisplayproducts.com.

Carefully examine the contents of this package. If you suspect that there is damage or

missing parts, contact Quilt Display Products at (937) 506-0032 between the hours of

8:00 AM and 5:00 PM, Mon-Fri, Eastern Standard Time for directions on how to proceed.

Please keep the original package and packing material in the event that you need to return

the product to us.

Make note of the existence of the following contents.

1. Modern Style Quilt Wall Shelf with Quilt Rail

2. One small bag containing:

a. Two Metal Wall Anchors (E-Z Ancor™)

b. Two Screws

c. Two Wooden Supports with Holes

Begin with Step 1 on the next page and follow the directions exactly. All of our wall shelves

are designed to hold about 80 lbs, so they should be secure enough for even your largest

quilt.

When you have finished hanging your wall shelf, add your favorite quilt and set some

cherished items on the shelf. Then, stand back and enjoy your accomplishments!

●

Customer Service 937-506-0032

●

www.quiltdisplayproducts.com

Table of Contents

Do you have a question about the E-Z Ancor and is the answer not in the manual?

Page 1 We want you to be pleased with our products and our service, so if you need verbal assistance with the assembly or hanging of any of our quilt display products or if you have any suggestions on what we can do to improve our service to you, please feel free to contact us in any way listed here: By phone at (937) 506-0032, by e-mail at info@quiltdisplayproducts.com or by visiting...
Page 2 “D” between the centers of the mounting features on the back of your wall shelf. Step 2 Use a Phillips screwdriver to insert an E-Z Ancor™ at each marked location on the wall by gently pushing and turning in a clockwise direction. Be sure after tightening, that the surface of the E-Z Ancor™...
Page 3 HANGING INSTRUCTIONS If you are installing the E-Z Ancor™ into a location on your wall that has a stud behind it, you may need to apply more pressure with the screwdriver to insert it. The E-Z Ancor™ is designed to be installed into drywall, or drywall backed by a wooden stud. If this doesn’t work for you, remove the E-Z Ancor™...
Page 4 Slide your wall shelf over the two wooden supports you attached to your wall earlier. Lower it onto them so that the two beveled surfaces interlock providing a secure connection. This completes the hanging process. Copyright 2016 Quilt Display Products ● Customer Service 937-506-0032 ●...