Orbit OceanTRx7 Manual
  1. Manuals
  2. Brands
  3. Orbit Manuals
  4. Antenna
  5. OceanTRx7
  6. Manual

Orbit OceanTRx7 Manual

Maritime stabilized vsat system
Hide thumbs Also See for OceanTRx7:
Table of Contents

Advertisement

Quick Links

Download this manual
OceanTRx7
TM
Maritime Stabilized VSAT System
Technical Note
Above Deck Mux (ADMx)
Document: TEC32-1664-009, Revision A
January 2013
COMMUNICATION WITHOUT BOUNDARIES
Orbit Communication Systems Ltd. P.O.B. 42504, Israel, Tel: +(972) 9 892 2777, Fax: +(972) 9 885 5944 www.orbit-cs.com

Advertisement

Table of Contents
loading

Related Manuals for Orbit OceanTRx7

Summary of Contents for Orbit OceanTRx7

  • Page 1 OceanTRx7 Maritime Stabilized VSAT System Technical Note Above Deck Mux (ADMx) Document: TEC32-1664-009, Revision A January 2013 COMMUNICATION WITHOUT BOUNDARIES Orbit Communication Systems Ltd. P.O.B. 42504, Israel, Tel: +(972) 9 892 2777, Fax: +(972) 9 885 5944 www.orbit-cs.com...
  • Page 2 Orbit Communication Systems Ltd. makes no warranty of any kind in regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
  • Page 3 Revision History and Control Revision History Rev # Modified by Date Comments Rev. A Edox TEC32-1664-009 OceanTRx7™ ADMx Technical Note...
  • Page 4 About this Manual This manual is designed to guide you through the procedures required for maintaining the Above Deck Mux (ADMX) for the OceanTRx7™ Maritime Satellite Communication System. Text Conventions Style Indicates Example Text Contents Normal descriptive text Text System Status...
  • Page 5 Effective Releases This document is effective for Release 1 (R1) and Release 2 (R2) of the OceanTRx7™ Maritime Satellite Communication System. OceanTRx7™ Maritime For a description of the changes between R1 and R2, refer to the Satellite Communication System Release Notes TEC32-1664-009 OceanTRx7™...

  • Page 6: Table Of Contents

    Spare Kit Contents ..................... 2 Required Tools and Parts ..................3 Preliminary Procedures ..................... 4 Replacing the ADMx ......................5 Removing the ADMx ....................5 Installing an ADMx ..................... 7 Post replacement check ....................10 TEC32-1664-009 OceanTRx7™ ADMx Technical Note...

  • Page 7: Introduction

    1.2.1 Torque Table The following table provides the torque that should be used when tightening screws of the listed types, as relevant. Table ‎ 1 -1: Torque Values Screw Type Torque 10.2 1.35 TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 1 of 10...

  • Page 8: Admx Description

    The following table provides a list of the parts in the ADMX spare kit. Table ‎ 1 -2: Spare Part Kit Contents KIT32-1664-008-SP Description Quantity 25-1184-2 ADMX - FOR AL-7103/7107-SYS H04014071002 SCKT FH90 SCR M4X10 STST H04015071202 SCKT FH90 SCR M5X12 STST TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 2 of 10...

  • Page 9: Required Tools And Parts

    The following table provides a list of tools and customer-supplied parts that are needed to perform the procedures in this Technical Note. Table ‎ 1 -3: Required Tools and Parts Tool/Part Name Notes Figure Open/ring wrench 13, 8 mm Allen keys: 2.5, 3mm TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 3 of 10...

  • Page 10: Preliminary Procedures

    (125 VAC / 250 VAC). Therefore, there still exists live voltage at the Utility Outlet after disconnecting the power supply to the ADE using the Mains Power On/Off Switch. Only qualified and authorized personnel are allowed to carry out system service/maintenance procedures. TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 4 of 10...

  • Page 11: Replacing The Admx

    RF cable from the ADMX. Step 2 Unlock and remove the network cable. Step 3 Using an 8mm Open/ring wrench, disconnect the two described RF cable from the ADMX. TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 5 of 10...
  • Page 12 Use a 2.5mm Allen key to remove the four screws securing the ADMX mounting plate. Step 6 Use a 3mm Allen key to remove the four screws securing the ADMX mounting plate. TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 6 of 10...

  • Page 13: Installing An Admx

    Secure the new ADMX to its mounting plate using a 3mm Allen key. Step 3 Mount the ADMX mounting plate in its place on the PEDESTAL and secure it using a 2.5mm Allen key. TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 7 of 10...
  • Page 14 Connect and tighten the TX red RF cable to J2. Connect and tighten the RX red RF cable to J1. Step 6 Reconnect and tighten blue RF cable to the ADMX. TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 8 of 10...
  • Page 15 Step 7 Reconnect the network cable to the ADMX. TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 9 of 10...

  • Page 16: Post Replacement Check

    4 Post replacement check After the ADMX has been replaced, perform the following test procedures to verify system functioning. OceanTRx7™ Installation and Operation Manual 1. Start up the system (see the instructions). 2. Verify that there are no ERR/WRN system messages and that there is communication between the CCU and the ACU.

Table of Contents