Receiving Instructions - Phase Technologies DV Series User Manual

Figure 2 shows output voltage after being filter by the dv series dV/dt filter.
Figure 2 – Output Voltage After dv Series dV/dt filter.
Figure 3 shows a output voltage after being filtered by the sw series sine wave filter.
Figure 3 – Output Voltage After sw Series Sine Wave Filter.
Phase Technologies output filters can be configured in Open, NEMA Type 1, or NEMA Type
3R enclosures. Open filters are intended to be installed in a panel. Type 1 filters come with
an enclosure designed for indoor use only. Type 3R enclosures are made for outdoor use.
Make sure the filter has the proper enclosure type for your application.

1.1 Receiving Instructions

Phase Technologies sine wave filters are thoroughly inspected and tested before packaging
for shipment. Upon receiving the unit, immediately inspect it for any damage that may have
occurred during shipping. If any damage is found, contact the Phase Technologies' service
2 | P a g e