Advertisement
Assembly Directions for the
Classic Terrace Dining Chair
PACKAGE CONTENTS
1 Hardware Package 1 Back
1 Front Cross Piece
2 Arm Assemblies
1
Item Number: CTDC2744
Back
4 • 2" Pan Head Screws
6 • 2" Screws
1 Seat
2 • 3" Screws
4 • 4" Screws
2
3
Use to measure bolts
Seat
HARDWARE PACKAGE
• #2 Sq. Drive Bit
4
TOOLS NEEDED
Cordless Drill
5
Advertisement
Table of Contents
Summary of Contents for DutchCrafters CTDC2744
- Page 1 Assembly Directions for the Classic Terrace Dining Chair Item Number: CTDC2744 Back Seat PACKAGE CONTENTS HARDWARE PACKAGE TOOLS NEEDED 4 • 2” Pan Head Screws Cordless Drill 1 Hardware Package 1 Back 6 • 2” Screws 1 Front Cross Piece 1 Seat 2 •...
- Page 2 Step #1 Lay Arm Assembly on side, and slide Seat Assembly in slot. Push forward, and upward while fastening with 2” Screws so that the Seat Slats are flush with top, and front of Slot. Slot Step #1 Step #2 Set the Tendon of Front Cross Piece in the Mortise, and fasten using 2”...
Need help?
Do you have a question about the CTDC2744 and is the answer not in the manual?
Questions and answers