Summary of Contents for Mard Audio DAN-WIFI-300
- Page 1 DAN-WiFi-300 multiroom single speaker Wireless WiFi Bluetooth Ceiling Speaker DAN-WIFI-300 User manual Version 1.0 - 1 -...
-
Page 2: Function Introduction
AirPlay multi-room. It can also use third-party player which is in compliance with DLNA standard to play music on Android devices or PCs. Dual-band WiFi full-speed transmission, and diversified experience HiFi music played without delay can be realized through DAN-WIFI-300. Function Introduction ... -
Page 3: Technical Parameters
DAN-WiFi-300 multiroom single speaker Support Spotify / Tuneln / iHeartRadio / Amazon music /Tidal etc. Support common lossless audio format decoding, up to 192kHz/24bit format Support MP3、AAC、FLAC、ALAC、WMA、APE、WAV、OGG and other audio formats 2.Technical Parameters Items Descriptions Product Name... -
Page 4: Structure Description
DAN-WiFi-300 multiroom single speaker 3.Structure Description - 4 -... - Page 5 DAN-WiFi-300 multiroom single speaker 4. Infrared remote control description ( Remote control ) Name Features Standby key Enter standby/Exit standby Short press: Mute/Unmute Mute button Long press: Factory reset VOL+ Volume Plus Short press: Play/Pause Play/pause Long press: WPS/Pairing - 5 -...
- Page 6 5.1 APP application Please download the Audio System from the APP Store or Google Play so as to use DAN-WIFI-300 ceiling speaker together with the supporting power amplifier. The APP in the following document descriptions refers to the Audio System.
-
Page 7: Installation
5.2 Connection and installation 5.2.1 Ceiling Speaker connection After taking out the DAN-WIFI-300 ceiling speaker, read the picture instructions of the product firstly. Plug in the Ethernet wire to the ceiling speaker(when needed), plug the matching power adapter into the DC socket to supply power to DAN-WIFI-300. - Page 8 DAN-WiFi-300 multiroom single speaker - 8 -...
- Page 9 5.4 Prompt and Operations 5.4.1 Voice prompt description The DAN-WIFI-300 ceiling speaker will send a voice prompt to remind the user. The user might use the DAN-WIFI-300 ceiling speaker according to the voice prompt. The voice prompt description is as follows: ...
- Page 10 5.4.3 Operation instructions Standby and wake-up: When DAN-WIFI-300 is working, short press the standby button on the remote control to control the DAN-WIFI-300 to enter standby and stop the music; when the DAN-WIFI-300 is in standby, short press the standby button on the remote control or select the song to play in the APP or Select Source to wake up DAN-WIFI-300.
- Page 11 DAN-WiFi-300 multiroom single speaker Volume adjustment: The volume of the DAN-WIFI-300 can be adjusted through remote control and APP. The output gain of the ceiling speaker changes with the volume level and is displayed on the APP volume bar. (as shown in the picture below) ...
- Page 12 Parameter reset: Long press the MODE button of the remote control to reset the system parameters of the DAN-WIFI-300, and reset the BASS, TREBLE and volume to the factory default state. Restore factory settings: In the Device interface of APP, Select the Device ...
Need help?
Do you have a question about the DAN-WIFI-300 and is the answer not in the manual?
Questions and answers