WaveSplitter WST-PSP002 Operation Manual

OPERATION MANUAL
Model No. WST-PSP002
HDMI 2.0 4K@60Hz 1x2 Splitter
Safety Instruction
Introduction 標題:
英文字體-Arial (粗體) / 字型 12 內文: 英文字體-Arial / 字型 9
The WST-PEX004 is a simple to use plug and play solution which lets the user extend HDMI signals up to 50m using a single low
cost Cat.6 U/UTP cable (not included). For added convenience IR signals (20-60 kHz) can also be extended using the supplied IR
Receiver and Emitter cables.
Supporting resolutions up to Full HD 1920x1080p@60Hz, video content can be seen with incredible clarity at distances up to 50m,
perfect for use in a variety of AV and digital signage applications in a range of settings.
The Extender features an HDMI loop-through output on the Transmitter with simultaneous viewing so that a local display can be
connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are
connected, the EDID data, which determines the supported video and audio formats, can be used from either a local monitor
connected to the Transmitter or the remote monitor connected to the Receiver.
Power over Cat.6 (PoC) functionality enables the Extender to operate from a single power supply connected to the Transmitter,
allowing the Receiver to be located where there is limited access to mains power sockets making it ideal for retro fit installations.
Copyright © 2020 Wavesplitter AV Technology | Wavesplitter .com
TEL：1-510-0651-7800 MAIL：sales@wavesplitter.com