QYK SONIK ZOE bliss User Manual

QYK
SONIC
USER MANUAL
Setup:
The Zoe-bliss is shipped with travel lock on the device to prevent it from
accidentally powering on during shipping.
Power On & Intensity settings. Power On the ZOE-bliss by pressing the
indented button on the flat side. Zoe Bliss has 15 levels of pulsation Intensities.
Higher levels of intensities suit cleansing, while lower levels are for anti aging and
massage. You may also adjust the intensity of pulsations to suit your skin type.
The intensity level you select is memorized, so every time the device is powered on,
it starts at the intensity level previously set to. You may change the intensity to
desired level when using, or you may simply select the best intensity level that suits
your skin type so everytime the device starts at that level.
Cleansing:
2
1 Wet your face.
4 4
Power On Zoe 5
by Pressing the
power button in
the center.
QYK
SONIC
Apply your favourite
3
Wet Zoe.
cleanser.
2a. You can apply your
Cleanse around your cheek area
Increase or decrease the 6
for about 30 seconds by gently
gliding Zoe over the cleanser to
Intensity of vibrations by
lather it.
pressing the - or + buttons.
Gentle circular glides produce
You may adjust the intensity
better results. The Base flashes
to suit your skin type. Higher
white every 15 seconds indicating
intensities always cleanse you to switch areas to prevent
over cleansing.
better.
Thank you :)
and Congratulations on purchasing your Zoe, the latest in SkinCare T ech, from QykSonic.
Your Zoe is a simple yet highly effective skincare device that efficiently cleanses and
rejuvenates your skin using Sonic pulsations through thousands of silicone touch points.
Consistent use makes your skin smooth, keeps it looking younger and boosts the natural
glow as well as preventing acne breakouts, wrinkles and signs of aging.
We hope you will greatly enjoy the benefits of your Zoe, but first please take a few
minutes to go through this user manual to ensure proper use and care for your skin as
Introduction:
Cleansing
Touchpoints
FRONT
Zoe is made of medical grade silicone
and has Soft cleansing touchpoints
on the front and Medium-Hard
T ouchpoints on the back. The front is
suited for facial cleansing, for all skin
types, while the back is used for
Anti-Aging Massage and also to help
Product Application and Penetration.
Cleansing:
Cleanse forehead Cleanse forehead
7 7 8 8
area for around 15 area for around 15
Secs. Secs.
You may cleanse
4
10
under your chin
and neck areas as
well.
13
12 Dry using a towel.
Anti-Aging mode:
The back/curved
side of Zoe may
be used for
anti-aging
massage and
product
application/pene
tration.
Power On Zoe
4
1
2
well as Zoe.
You will find 3 buttons under the bristles on the
front as shown above. The center button to
Power On/Off, and the buttons marked - & + to
adjust the Pulsation Intensity.
Massage &
Application
Touchpoints
QYK
SONIC
Light
Metal
Base
Applicator
Base
Charging
Port
BACK
Cleanse around the Cleanse around the
9 9
nose for 15 secs. nose for 15 secs.
Use the pointed corner Use the pointed corner
bristles to reach tight bristles to reach tight
spots around nose and spots around nose and
under eyes. under eyes.
Turn off your zoe by
11
pressing the power
button.
Clean Zoe with some soap
14
and water.
The anti aging zones as
shown above may be
focused, to elasticize
skin and reduce
wrinkles.
Lower the intensity by
3
pressing on + -
Medium to Low
recommended
Under the eyes for Under the eyes for
15 secs. 15 secs.
Rinse your Face.
You may towel dry
your Zoe too.
You may use Zor
with your favourite
anti aging serum,
just put the serum
on the bristles
before massaging.
Massage with a
gentle rocking action
on your anti aging
zones.
10-12 Secs is
recommended time
for each zone