Advertisement
RM150
Instruction Manual
RM150
Check the items after receiving
1
Before installing, check to ensure that you have received all
the package contents.
Connect the Receiver and the Power
3
Supply
Take the female end of the receiver and connect it with the male
plug of the power supply. Then plug the power supply to the
power source.
Remote
Holder
Receiver
Finished.
5
Your remote is connected and ready to use.
Female
Please take note of the difference between
the male and female plugs.
Connect the Receiver and the Mirror.
2
Take the end of the receiver with the male plug and connect it with
the female plug of the mirror.
Match the Remote and the Receiver.
4
Press the match button on the receiver. The circle above the word
run will start blinking red. Once that light is steady, then the
receiver has found the remote. A blue light will also flash on top
of the remote to indicate that it's ready to use.
Male
www.evervue.com
Advertisement
Table of Contents
Summary of Contents for MirrorVue RM150
- Page 1 RM150 Instruction Manual RM150 Female Male Remote Please take note of the difference between Holder the male and female plugs. Receiver Check the items after receiving Connect the Receiver and the Mirror. Before installing, check to ensure that you have received all Take the end of the receiver with the male plug and connect it with the package contents.
- Page 2 RM150 Change Battery Remove the back Cover Insert two AAA batteries. Gently slide down the cover at the back of the remote. Insert two AAA batteries into the remote. Ensure that the battery is placed correctly to match the corresponding positive or negative sign, otherwise it would not work.
Need help?
Do you have a question about the RM150 and is the answer not in the manual?
Questions and answers