Page 2
A Note on this Kit and How to Read the Instructions This kit is comprised of parts from may sources, including Inside the Armour and AFV Club kits. To reduce confusion you should note the difference in part numbers Part numbers in Times New Roman and without preceding letters are Inside the Armour parts. To further differentiate these parts, the drawings of ITA resin parts are...
Page 3
6. Occasionally parts will warp in storage if exposed to heat, or as part of the longer term curing process. Immersion in hot (NOT boiling) water will soften the parts sufficiently for reshaping. If this fails contact Inside the Armour for free parts replacement Tips for Assembling Photo Etched Brass 1.
Page 9
ITA Idlers Dry Fit AFV Idler Club Remove and discard AFV Idlers...
Page 12
PE2-18 PE1-7 PE1-2 PE1-10 PE1-4 PE1-3 PE1-8 PE1-14 PE1-9 PE1-14 Placing the Firewall 15 15 Dry Fit Upper Deck DO NOT FIX Styrene Rod Mark line of riveted plate behind Turret Ring Remove Upper Deck and Place Firewall in line with the marked lines PE1-15...
Need help?
Do you have a question about the Churchill ARVII Ultimate Edition and is the answer not in the manual?
Questions and answers