1. Manuals
  2. Brands
  3. Sinopulsar Technology Manuals
  4. Personal Care Products
  5. WetBeacon-01
  6. User manual

Sinopulsar Technology WetBeacon-01 User Manual

Wetness sensing kit
Hide thumbs
1
2
3
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual of Wetness Sensing Kit
Product Name: Wetness Sensing Kit
Product Brand: Sinopulsar Technology Inc.
Product Number: WetBeacon-01
1.

Wear the electronic diaper first.

2.
The conductive clamps are to be clamped onto the belt of diaper, conductive
clamp to contact pad with one on one.
3.
Plug the USB connector of the clamp into USB socket of the WetBeacon.
4.

Power on the WetBeacon and start the WetObserver.

5.
Use "percentage % " to indicate wetness level inside the diaper. (e.g. 0% for
dryness and 99% for the wettest situation)
6.
The wetness alarm threshold level in the WetObserver can be adjustable.
7.
The WetObserver gets the wetness data transmitted from the WetBeacon. The
WetObserver has two warning systems. One is LED and another is buzzer. The
LED gives a visual signal and the buzzer provides an audible signal that the
diaper is wet.
Description for Buzzer and LEDs Event：
WetBeacon：
1. Wet Situation Alarm:
2. Low battery Alarm:
3. Normal operation:
Red LED
flashes once every second.
Red LED
flashes once every five seconds.
Green LED
flashes once every five seconds.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WetBeacon-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sinopulsar Technology WetBeacon-01

  • Page 1 User’s Manual of Wetness Sensing Kit Product Name: Wetness Sensing Kit Product Brand: Sinopulsar Technology Inc. Product Number: WetBeacon-01 Wear the electronic diaper first. The conductive clamps are to be clamped onto the belt of diaper, conductive clamp to contact pad with one on one.
  • Page 2 WetObserver：Each Event occurs once every five seconds. 1. Wet Situation Alarm: Buzzer sounds three times and Red LED flashes once. 2. Out of Range Alarm: Buzzer sounds two times and Red LED flashes once. 3. Low Battery Alarm: Buzzer sounds once and Red LED flashes once.
  • Page 3 FCC ID: 2AGGGSPWSK2-01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Table of Contents