Summary of Contents for Yolink YL-11
- Page 2 Note: Please read this manual carefully before using the product and properly keep. Children are not allowed to use this product.
- Page 3 Welcome Phone Holder can be installed on the handlebars and fit for almost any vehicle on the market, such as motorcycle, mountain bike (MTB), e-bike, folding bike, scooter and etc. Phone size requirement: 60-88 mm (4-7.2 inch) screen, thickness of not more than 10 mm(0.4 inch).
- Page 4 Components Body Connecting Buckle Screw Adjusting Knob Plum Blossom Knob...
- Page 5 Install Before installation, please make sure the vehicle is off and parking on the center stand. 1. Take off the plum blossom knob. 2. Mount the connecting buckle on the body, then rotate plum blossom knob to tighten.
- Page 6 3. As show in the image below, mount the phone holder on the handlebar by fixating the buckle (Pay attention to installation direction). The rubber pad should be installed in the buckle for use if the handlebar diameter is about 22.2 mm(0.87 inch). Buckle...
- Page 7 4. Find to the proper position and angle, then tighten the locking screw with your fingers. 5. You can adjust the angle by loosening plum blossom knob.
- Page 8 6. Loose the adjusting knob, put in the phone, then tighten the knob.
-
Page 9: Production Information
3. To avoid accidents, do not use the phone when riding. Production Information Product: Phone Holder Model: YL-11 Dimensions: 80 × 150 × 77 mm(3.1 × 5.9 × 3.0 inches) Weight: About 175 g (6.2 ounces) Materials: Aluminum Alloy & PA66 & TPU & TPE... -
Page 10: Warranty & Customer Support
Warranty & Customer Support If you have any questions with the product, please contact us and we will solve it for you as soon as possible.
Need help?
Do you have a question about the YL-11 and is the answer not in the manual?
Questions and answers