Advertisement
Quick Links
Advertisement
Summary of Contents for Dewekon Barbekon
- Page 1 BARBEKON MANUAL Blog: http://barbekon.blogspot.be/ Website: http://bbq-barbekon.be/...
- Page 2 Blog: http://barbekon.blogspot.be/ Website: http://bbq-barbekon.be/...
- Page 3 1.3 Place the grid and the charcoal tray at the desired heights. Turn the grid sideways and fill the coal tray with the desired amount of charcoal. Ideally, you start with charcoal as a base and build up using briquettes. Blog: http://barbekon.blogspot.be/ Website: http://bbq-barbekon.be/...
- Page 4 Ø The coal tray slides into the gutter in the ash tray, which fills with burnt ashes. This will create a hermetic seal guaranteeing a nice steady fire. The Barbekon is especially designed to allow a precise temperature for every product. The coal tray and grid height can be adjusted indefinitely over quite some distance.
- Page 5 Ø When using briquettes, add a few briquettes from time to time, and you can keep on grilling. 4. WANT MORE ?: The Barbekon BBQ is entirely handmade. We can expand or adapt it according to your wishes. We already supply a number of nifty options (e.g. windscreens, side tables, electrolytic polish, smoking lid, etc.) and offer you the possibility to make your ideas or wishes come true.
- Page 6 Put the side leg of the table (no wheels attached) on the floor with the bolts facing up. Ø Take the L-profile and slide the mounting plate to the side onto the bolts of the leg. Make sure the open side is facing back. Blog: http://barbekon.blogspot.be/ Website: http://bbq-barbekon.be/...
- Page 7 L-profile with the edges of the leg, before tightening the nuts with the included wrench. Ø Keep the leg with the wheels upright and slide the L-profile over the bolts as shown. Blog: http://barbekon.blogspot.be/ Website: http://bbq-barbekon.be/...
- Page 8 Ø Take the full shaft and attach it by hand to the bottom of the L-profile (where a mounting plate has been provided). Make sure the locking pin is at the bottom. Blog: http://barbekon.blogspot.be/ Website: http://bbq-barbekon.be/...
- Page 9 Aligning it with the grid lets you do this by sight. Once aligned, tighten the nuts and bolts with the included wrench. Ø Repeat the same procedure for the other shafts in case your BBK has several units. Contact: Ondernemingenstraat 11 8630 VEURNE BELGIË Tel.: (32)(0)58/29.80.06 Fax.: (32)(0)58/31.32.85 E-mail: info@dewekon.be Web: www.dewekon.be VAT BE0823.383.312 Blog: http://barbekon.blogspot.be/ Website: http://bbq-barbekon.be/...
Need help?
Do you have a question about the Barbekon and is the answer not in the manual?
Questions and answers