OEM NSB-200AT Instruction Manual

Thank you very much for purchasing our products, please read this manual and instruction carefully before
using.
IMPORTANT SAFETY INSTRUCTIONS:
1. Read all instructions carefully before using.
2. Make sure use the rated voltage 120V
3. Do not operate this appliance if the cable or plug becomes damaged.
4. Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause
damage.
5. Repair malfunction machine or damaged cable only by authorized service representative. If the
supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
6. Ensure the appliance is switched OFF before connecting to the mains power supply.
7. Switch off the power supply and unplug from the mains socket when not in use, before cleaning or
changing accessories.
8. Do not install the heater right below a socket.
9. To prevent overload and blown fuses, do not plug other appliance into same outlet (receptacle)
10. Do not place the heater on carpets, don't place the cable under carpets. Arrange cord away from
traffic areas so that it will not be tripped over.
11. Indoor use only.
12. NEVER use this heater where it may come into contact with water i.e. bathroom, shower room,
INSTRUCTION MANUAL
Fan Heater
Model: NSB-200AT