Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Laekerrt CMEP02

  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Before using, make sure that the voltage of wall outlet corresponds to coffee maker rating plate. Use original accessories only. 2. This coffee maker can be used by physically/mentally disabled people or people who are lack of experience and knowledge about the coffee maker if they are under close supervision and instruction by persons who take responsibility for their safety and when they are aware of possible risks and dangers.
  • Page 4: Know Your Coffee Maker

    KNOW YOUR COFFEE MAKER Tank cover Handle Power indicator Water tank Single-cup indicator Double-cup indicator Knob Steam indicator Steam handle Brewing filter Metal funnel Steam wand Funnel handle Drip plate Measuring spoon Drip tray...
  • Page 5 First Use Preparation or Not in Use for a Long Period Before you use it for the very first time, clean the coffee maker twice based on the guidelines below. 1. Pour water into the water tank and do not exceed the "Max" mark in the tank.
  • Page 6 Note: When inserting the filter, please first align the small groove and then slightly rotate the filter to prevent it from falling. When removing the filter, please turn the filter back to the small groove position. 2. Insert the funnel and lock it tightly as shown by the indication sign, then place a cup under the funnel.
  • Page 7: Hot Water Function

    Hot Water Function Press the " " button, turn the "steam knob" to " ", and the steam pipe will start to discharge hot water; Turn the "steam knob" to " " to stop the hot water. Note: it is normal for the machine to make relatively large vibration sound during the process of discharging hot water.
  • Page 8 3.Position Steam Wand 4.Start Texturing Milk finger width Insert Steam Wand Arm at 12 o'clock. Spin the steam knob to to start texturing milk. Texturing Tip at 3 o'clock. Keep Finger Width makes a smooth hissing noise. Milk is moving in a whirlpool from edge and the steam vent is just action.
  • Page 10 5. After five minutes, press the " " button and repeat the Step 4 for 3 times. 6. Fill the water tank with water(No need to put in descaler). Press the " " button and repeat the Step 4 for 3 times. 7.
  • Page 12: Troubleshooting

    Troubleshooting Problem Reason Method 1. Fill the tank with water and press the ON/OFF button and the " " and " " button. 1. There is no water in the water tank. 2. The coffee maker needs to be preheated before the coffee can be 2.
  • Page 13 1.The coffee grounds are too thick or the 1. Change to a finer ground coffee grounds are not and use the back of the coffee scoop No grease pressed. to flatten it horizontally. 2. Coffee beans are not 2. Use fresh coffee beans/ground. fresh enough.
  • Page 14 Flash and Sound Explanation Problem Reason Method The steam knob points to the wrong place and Rotate the steam knob the coffee maker will Flash altogether, not operate. steam knob points to The coffee maker Please see “Cooling is hot. Function”...
  • Page 15: Warranty

    Warranty Every CMEP02 espresso machine comes with a 1-year limited warranty from the date of purchase. Please scan the QR code on our website to view the specific warranty policy. For more information, visit our website (www.laekerrt.com) or contact us directly.

Table of Contents