TPL73 – TPL77
CAUTION
1) If provided
© Copyright 2016 ABB. All rights reserved.
Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30
Disassembly and assembly
Dismantling and fitting nozzle ring at
turbine end
Remove holder (90175) and then nozzle ring (56001).
Segment connection disassembly
Figure 1
Remove screws (61044) and segments (51012).
Fit two studs (90177) in the bottom section.
Pull gas inlet casing (51001) together with nozzle ring (56001) away
from gas outlet casing (61001) until the nozzle ring can be lifted out.
Fully withdraw the gas inlet casing and remove it.
When setting down gas inlet casing, use suitable underlays.
Remove gasket (61050).
8
8.8
Page 114