Table of Contents
Advertisement
Audio 2, 4, or 5.1-channel configuration
Port
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
9.
Voltage selector. Use this switch to select the appropriate system input voltage according
to the voltage supply in your area. If the voltage supply in your area is 100-127V, set the
switch to 115V. If the voltage supply in your area is 200-240V, set the switch to 230V.
Setting the switch to 115V in a 230V environment or 230V in a 115V environment will seriously
damage the system!
The voltage selector is available depending on the Power Source Unit model.
10.
Power connector. Plug the power cord to this connector.
RATING: • 100~120/220~240Vac, 50/60Hz, 9.0/4.5A.
11.
Expansion slot brackets. Remove the expansion slot bracket when installing an expansion
card.
12.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
Activity/Link LED
Status
OFF
ORANGE
BLINKING
13.
Air vents. These vents allow air ventilation.
DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer.
16
Headset 2-channel
Line In
Line Out
Mic In
Speed LED
Description
Status
No link
OFF
Linked
ORANGE
Data activity
GREEN
4-channel
5.1-channel
Rear Speaker Out
Rear Speaker Out
Front Speaker Out
Front Speaker Out
Mic In
Bass/Center
Description
10Mbps connection
100Mbps connection
1Gbps connection
ACT/LINK
SPEED
LED
LED
LAN port
Chapter 1: Getting started
Advertisement
Table of Contents
