Subscribe to Our Youtube Channel
Related Manuals for Rohm EXTRA-RV
Summary of Contents for Rohm EXTRA-RV
- Page 1 Translation of the Original Operating Manual Drill Chuck EXTRA-RV Store for reference Version 1.0 • 13.10.2022...
-
Page 3: Table Of Contents
Table of Contents Table of Contents About this Operating Manual.............. 4 Manufacturer Details................. 4 Copyright .................... 4 Warranty and Liability ................ 4 Conventions of Presentation .............. 6 1.4.1 Text Display.................. 6 1.4.2 Display of Safety and Warning Instructions ......... 7 Safety ...................... -
Page 4: About This Operating Manual
1 | About this Operating Manual About this Operating Manual This Operating manual describes in detail the use, installation, assembly and maintenance of the drill chuckEXTRA-RV. The efficiency of the drill chuck depends primarily on correct use and careful maintenance. This Op- erating manual serves as the leading document and is provided on delivery of the product. - Page 5 About this Operating Manual | 1 be inappropriate. RÖHM is not liable for damage resulting from such use. The risk is borne solely by the operator. Product liability for consequential damage of any type is excluded for damage and operational interruptions resulting from operating errors, failure to observe this Operating manual or incorrect maintenance by unauthorised personnel.
-
Page 6: Conventions Of Presentation
1 | About this Operating Manual Conventions of Presentation 1.4.1 Text Display To improve legibility and comprehension of the text, the following conven- tions were agreed: Text type Marking Function Operating instruction Marks a sequence of actions 2., etc. Marks an individual operating instruc- tion Ø... -
Page 7: Display Of Safety And Warning Instructions
About this Operating Manual | 1 1.4.2 Display of Safety and Warning Instructions Safety and warning instructions are marked by pictograms. The signal word and the colouring show the level of danger. Observe the safety instructions to prevent personal injury and damage to property. -
Page 8: Safety
Only suitable rotationally symmetric tools may be clamped in the drill chuck- EXTRA-RV. The permissible usage and environmental conditions must be observed (Technical data [} 11]). Improper Use If the drill chuck is operated for a purpose other than the intended use as specified in this Operating manual, this is deemed to be improper use. -
Page 9: Obligations Of The Operator
Safety | 2 Obligations of the operator Before all work on and with the drill chuck, the operator is to ensure: ▪ that the operating instructions are available to the responsible person- nel. ▪ that the responsible personnel are sufficiently qualified for their work. ◦... -
Page 10: General Dangers
2 | Safety General Dangers When using the device there is a special potential of residual risks ▪ during assembly and set-up work, ▪ during operation and ▪ during maintenance and service work. This potential risk cannot be completely eliminated considering the func- tional availability of the operating manual. -
Page 11: Product Description
Product Description | 3 Product Description About this drill chuck The drill chuck EXTRA-RV is a manually operated drill chuck for use with hand-held corded drills and cordless drills with and without a spindle stop. Disk Clamping sleeve Clamping jaws... -
Page 12: Environmental And Operating Conditions
3 | Product Description 3.2.1 Environmental and operating conditions The drill chuck is designed for the following environmental and operating conditions: Ambient medium Air, non-corrosive/non-aggressive fluids and gases Place of use Indoors and outdoors. For further information, please refer to the operating manual of your hand-held power corded drill or cordless drill. -
Page 13: Disassembly/Assembly Of The Drill Chuck
Disassembly/assembly of the drill chuck | 4 Disassembly/assembly of the drill chuck WARNING Starting machine during assembly. Hand injuries. Ø Prior to assembly, disconnect the power supply of the corded or cordless drill (pull the mains plug/remove the battery). The following assembly of the drill chuck is a recommendation of RÖHM. The assembly must be carried out in accordance with the machine manu- facturer's operating manual. - Page 14 4 | Disassembly/assembly of the drill chuck 8 −10 mm Fig. 1: Disassembling a drill chuck (with spindle stop) 14 / 24 Drill Chuck EXTRA -RV...
- Page 15 Disassembly/assembly of the drill chuck | 4 Assembling the drill chuck § Power supply disconnected (mains plug pulled/battery removed). 1. Check the machine spindle and the new drill chuck for soiling and clean, if necessary. Ø In case of damage at the machine spindle or the drill chuck, the drill chuck must not be mounted.
- Page 16 4 | Disassembly/assembly of the drill chuck Fig. 2: Mounting a drill chuck (with spindle stop) 16 / 24 Drill Chuck EXTRA -RV...
-
Page 17: Without Spindle Stop
Disassembly/assembly of the drill chuck | 4 Without spindle stop Disassemble the drill chuck § Power supply disconnected (mains plug pulled/battery removed). 1. Open the clamping jaws of the drill chuck. 2. If installed, screw out the retaining screw (left-hand thread) and re- move it (Figure A, page 18). - Page 18 4 | Disassembly/assembly of the drill chuck Fig. 3: Disassembling a drill chuck (without spindle stop) 18 / 24 Drill Chuck EXTRA -RV...
- Page 19 Disassembly/assembly of the drill chuck | 4 Assembling the drill chuck § Power supply disconnected (mains plug pulled/battery removed). 1. Check the machine spindle and the drill chuck for contamination and clean, if necessary. Ø In case of damage at the machine spindle or the drill chuck, the drill chuck must not be mounted.
- Page 20 4 | Disassembly/assembly of the drill chuck Fig. 4: Mounting a drill chuck (without spindle stop) 20 / 24 Drill Chuck EXTRA -RV...
-
Page 21: Operation Of The Drill Chuck
Operation of the drill chuck | 5 Operation of the drill chuck CAUTION Do not hold the drill chuck while the machine is running. Hand injuries. Ø For machines without spindle stop, only use drill chuck with holding ring. Ø Only open and close the drill chuck by hand; only clamp and release tools when the machine is at a standstill. - Page 22 5 | Operation of the drill chuck CAUTION Risk of injury due to ejection or falling out of tools during op- eration of the drill chuck. The drill chuck is already unlocked after the first click in “Auf (Open)” direction. During operation in this unlocked condition, unin- tentional opening of the drill chuck is possible.
-
Page 23: Maintenance
Maintenance | 6 Maintenance The drill chuck is maintenance free. Cleaning Remove coarse dirt from the drill chuck with a clean cloth or a brush. Troubleshooting Fault Possible cause Measure Tools are no longer suf- The drill chuck is soiled. Clean the drill chuck as ficiently clamped or be- far as possible. -
Page 24: Notes
10 | Notes Notes 24 / 24 Drill Chuck EXTRA -RV...
Need help?
Do you have a question about the EXTRA-RV and is the answer not in the manual?
Questions and answers