Page 1
RDS-1000 5-Bay Tablet Charger User’s Manual 1 Last Updated: November 7, 2018...
Page 2
Copyright Notice This document is copyrighted, 2018. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
Page 3
Acknowledgement All other products’ name or trademarks are properties of their respective owners. Cortex is the registered trademark of ARM Holdings Android is the trademark of Google Inc. All other product names or trademarks are properties of their respective owners. Preface...
Page 4
Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity RDS-1000 AC/DC power adapter If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Preface...
Page 5
About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the AAEON.com for the latest version of this document.
Page 6
Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
Page 7
If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device...
Page 8
FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Caution: There is a danger of explosion if the battery is incorrectly replaced.
Page 10
China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Panel PC/ Workstation Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) PCB & Other ○...
Specifications System 5 Bay Charge Bay 5 LED Indicator LED Indicator Mechanical Black Color 299.61 mm X 259.61 mm X 45 mm Dimension (W x H x D) 1.8kg Gross Weight Environmental 0°C ~ 40°C Operating Temperature ...
Product Overview Part Function Charge Bay Tablet Charging DC-in Jack Connect the DC power cable to this jack LED Indicator Shows charging status Chapter 2 – Getting Started...
Notes before use Before using your device, please read through the following instructions Use only the power adapter that comes with your device. Using a different power adapter may cause damage. The AC cable is designed for the RDS-1000 only ...
Charging Status Charging status for 3 stages: non-connected (Off), charging (Orange lights), full-charged (Green lights) Pros: working properly on system off; current value is frozen to predictable. Cons: charging & full-charged switching is inaccessible while system on* *due to there's no I2C communication in between tablet & docking, docking charger IC cannot tell battery is fully charged.
Statements Declarations and Safety Statements Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
A.2 Canadian Notice IC Regulations This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
A.3 Safety Caution Important Safety Instructions Power Safety Requirement Products with electrical current ratings up to 3A and weighs more than 1 Kg must use approved power cords greater than or equal to: VCTF, 3G or 0.75mm Basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bathtub, wash bowl, ...
Page 23
voisinage de la fuite Utiliser seulement le cordon d’alimentation et la batterie indiqués dans le manuel. Ne pas jeter les batteries dans le feu. Elles pourraient exploser. Vérifier les dispositions locales de recyclage. Appendix A – Statements...
A.4 Battery Disposal There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect. Disposer de la batterie en accord avec les instructions.
Page 25
The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment.
A.5 Battery Caution There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect. Disposer de la batterie en accord avec les instructions.
A.6 Adapter Caution This RTC is for use with model NO. FSP036-DHAN3 (AAEON Part number: ) Ce modèle RTC est à utilizer avec le modèle n° FSP036-DHAN3. (AAEON Référence: Appendix A – Statements...
A.7 FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 29
IMPORTANT NOTE: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. Appendix A –...
Need help?
Do you have a question about the AAEON RDS-1000 and is the answer not in the manual?
Questions and answers