ALL WEATHER ACCESS EuroMat Information Sheet

EuroMat Information Sheet
EuroMat has a rugged raised surface profile for excellent
traction for light to heavy vehicles, plant and machinery.
Protects against severe rutting and eco damage to ground
and sensitive sites.
EuroMat
Connection Point

EuroMat Specifications

Material: High Density Polyethylene (HDPE)
Size: 2400mm x 1200mm x 12mm
Weight: 36kg
Loading: 80 tonnes
Upper Working Temperature: 55 - 120 C
Flammability: HB
Fire Fighting Measures: water, foam, carbon dioxide,
dry powder.
Sensitization:Polyethylene is not considered to be a
skin sensitizer, Does not promote chronic toxicity or
carcinogenicity.
Disposal: 100% can be recycled.
Waste Code: 070213 (waste plastics)
120105 (plastic shavings / turnings)

Installation

Manual Handling

Lifting Point
To remove from the wagon bed, suitable edge
protection will be required around the wagon bed.
removal of mats is subject to site manual handling
assessment, each mat may be lifted by 2 or more
people.
Handling
To lift a stack of 15 mats from a wagon bed use an
appropriate forklift truck.
Place mat on to the ground to provide the coverage
required. Ground preparation is not usually needed.

Connecting Mats

As each mat is placed it is essential to connect it to the
neighbouring mats using the correct connector.
To connect 2 mats place the 2 way connector
underneath the mats.
o
Insert bolt M10 x 25 x 2
The raised cylinders on the connector unit should fit
within the holes on the corner of each mat. When in
place secure using 2 connection bolts,( M10 x 25 with
steel and rubber washer) taking care not to over tighten.
Where 4 mats need to be place together, use the 4 way
connector following the same process.
Insert bolt M10 x 25 x 4
01371 700 510
(Removal is the opposite procedure)
Bolt M10 x 25
Steel washer on top
of the rubber washer
Bolt M10 x 25
Steel washer on top
of the rubber washer