Related Manuals for furmates Co-rider K9
Summary of Contents for furmates Co-rider K9
- Page 1 Co-rider K9 furmates Co-rider K9 USER MANUAL ANOTHER QUALITY PRODUCT DISTRIBUTED BY valiantbrands.com.au MELBOURNE, AUSTRALIA...
-
Page 3: Important Instructions
- Remove all components from the carton and ensure that no parts are missing. Please look at the parts list for guidance. In case of missing parts, contact your dealer directly or email us at support@furmates.com.au. - This ride-on is built for pets with a maximum weight of 8kg. - Page 4 UNFOLDING THE CO-RIDER K9 STEP 1 1.1 Press button (1) and lift the rider arm upward until it is fully extended and engaged. 1.2 Pull the two lower sections apart in opposite directions until fully opened and you hear the centre shaft click into the locked position.
- Page 5 - test that it is securely engaged. STEP 4 PET CARRIER SETUP furmates Co-rider K9 1.Unfold the carrier bag. Using each side zip, close the sides of the carrier. 2.The carrier is ready for use with the included straps.To attach the longer straps provided, connect the locking hook (K1) to the ring (L1).
- Page 6 4. Test to make sure it is fully engaged. Ensure all connections are tight and secure. Handle The co-rider K9 is now ready to use pulling in the direction indicated. Tether Strap When walking beside the co-rider K9 be sure to hold the stroller handle firmly.
- Page 7 STEP 7 CONNECTING CO-RIDER K9 TO THE BABY CARRIAGE 7.1 Wrap the flexible strap of the Connector (C) around the stroller frame tubing (1). Insert it through the plastic slot (2) in the screw housing. 7.2 Turn the knob (3) to tighten until it is fully secured.
- Page 8 DISCONNECTING THE CO-RIDER K9 Press button (5) and pull hook to release. Disengage the hook from the ring to separate your Co-Rider from the frame. (Leave the connector attached to the frame for future easy connection and access) furmates Press the lower button (1) and push the front wheel downwards.
- Page 9 SECURING YOUR PET pet leash connector inside strap front view top view Unzip the upper flap of the bag. Pull the strap (with connector) out of the bag and connect it to the leash of your pet. Place your pet into the carrier bag, Zip the upper flap of the carrier bag.
-
Page 10: Safety Instructions
SAFETY INSTRUCTIONS • Do not use the Co-rider K9 unless your pet is comfortable and secured completely. The Co-rider K9 connector is meant to be connected to the frame at the rear side of the pram. • • Your pet must alight before reaching pavement edges, stairs, steep paths, tight corners and/or whilst manoeuvring backwards. - Page 12 For further information visit www.furmates.com.au...
Need help?
Do you have a question about the Co-rider K9 and is the answer not in the manual?
Questions and answers